BEP_PCB temperatures check
Summary
| Date start | 2018:106:12:57:00.086 |
| Date stop | 2018:113:13:58:10.513 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/APR1618/ofls |
| Run time | Tue Apr 10 13:32:23 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.33 | -2.40 | -1.64 | -0.53 | 0.56 | 1.79 | 2.59 |
| PITCH | -2.918 | -0.232 | -0.180 | -0.004 | 0.127 | 0.217 | 3.764 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.181 | -0.831 | -0.449 | 0.078 | 0.366 | 0.535 | 1.014 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.33 | 2.00 |
| TMP_BEP_PCB | 99 | 2.59 | 2.00 |
| PITCH | 99 | 3.764 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
