BEP_PCB temperatures check
Summary
| Date start | 2019:042:04:48:00.000 |
| Date stop | 2019:049:00:35:12.083 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/FEB1119/ofls |
| Run time | Thu Feb 7 17:34:50 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.48 | -1.79 | -1.24 | 0.15 | 1.14 | 2.72 | 3.78 |
| PITCH | -5.867 | -0.266 | -0.212 | -0.069 | 0.155 | 0.239 | 3.965 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.470 | -0.967 | -0.390 | -0.058 | 0.429 | 0.540 | 1.348 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.48 | 2.00 |
| TMP_BEP_PCB | 99 | 3.78 | 2.00 |
| PITCH | 1 | -5.867 | 3.00 |
| PITCH | 99 | 3.965 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
