BEP_PCB temperatures check
Summary
| Date start | 2019:014:05:30:05.499 |
| Date stop | 2019:021:00:55:36.955 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/JAN1419/ofls |
| Run time | Wed Jan 9 14:31:39 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.53 | -3.02 | -1.24 | 0.15 | 1.66 | 3.04 | 4.25 |
| PITCH | -5.221 | -0.250 | -0.140 | -0.011 | 0.223 | 0.270 | 5.097 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.586 | -0.804 | -0.311 | 0.165 | 0.520 | 1.146 | 1.670 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.53 | 2.00 |
| TMP_BEP_PCB | 99 | 4.25 | 2.00 |
| PITCH | 1 | -5.221 | 3.00 |
| PITCH | 99 | 5.097 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
