BEP_PCB temperatures check
Summary
| Date start | 2018:019:06:45:44.642 |
| Date stop | 2018:022:17:06:02.094 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/JAN1918/ofls |
| Run time | Thu Jan 18 16:57:59 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.50 | -3.43 | -1.75 | -0.22 | 1.08 | 2.22 | 3.34 |
| PITCH | -5.743 | -0.277 | -0.214 | -0.138 | 0.190 | 0.245 | 2.700 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.245 | -0.395 | -0.275 | 0.011 | 0.333 | 0.468 | 1.344 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.5 | 2.00 |
| TMP_BEP_PCB | 99 | 3.34 | 2.00 |
| PITCH | 1 | -5.743 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
