DPA temperatures check
Summary
| Date start | 2018:019:06:45:44.642 |
| Date stop | 2018:022:17:06:02.094 |
| Model status | OK (Planning Limit = 35.5 C) |
| Load directory | /data/acis/LoadReviews/2018/JAN1918/ofls |
| Run time | Thu Jan 18 16:51:02 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -3.07 | -2.01 | -1.12 | -0.11 | 0.84 | 1.68 | 2.77 |
| PITCH | -5.728 | -0.303 | -0.215 | -0.138 | 0.189 | 0.244 | 2.700 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.245 | -0.395 | -0.274 | 0.010 | 0.332 | 0.469 | 1.353 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -3.07 | 2.00 |
| 1DPAMZT | 99 | 2.77 | 2.00 |
| PITCH | 1 | -5.728 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: DPA residual histograms include only points where 1DPAMZT > 20.0 degC.
Red = telemetry, blue = model
