FEP1_ACTEL temperatures check
Summary
| Date start | 2018:043:13:13:30.498 |
| Date stop | 2018:050:03:15:10.054 |
| Model status | OK (Planning Limit = 46.0 C) |
| Load directory | /data/acis/LoadReviews/2018/FEB1218/ofls |
| Run time | Tue Feb 6 09:29:32 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_FEP1_ACTEL Violations
FEP1_ACTEL Model Validation
MSID quantiles
Note: FEP1_ACTEL quantiles are calculated using only points where TMP_FEP1_ACTEL > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_FEP1_ACTEL | -6.09 | -4.08 | -2.34 | -0.73 | 0.58 | 1.79 | 2.76 |
| PITCH | -4.086 | -0.251 | -0.198 | -0.090 | 0.129 | 0.220 | 2.947 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
| ROLL | -0.997 | -0.410 | -0.233 | 0.234 | 0.400 | 0.521 | 1.178 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_FEP1_ACTEL | 1 | -6.09 | 2.00 |
| TMP_FEP1_ACTEL | 99 | 2.76 | 2.00 |
| PITCH | 1 | -4.086 | 3.00 |
TMP_FEP1_ACTEL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
