FEP1_ACTEL temperatures check
Summary
| Date start | 2017:288:04:18:00.000 |
| Date stop | 2017:296:02:38:34.807 |
| Model status | OK (Planning Limit = 46.0 C) |
| Load directory | /data/acis/LoadReviews/2017/OCT1617/ofls |
| Run time | Tue Oct 10 10:57:02 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_FEP1_ACTEL Violations
FEP1_ACTEL Model Validation
MSID quantiles
Note: FEP1_ACTEL quantiles are calculated using only points where TMP_FEP1_ACTEL > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_FEP1_ACTEL | -2.94 | -2.22 | -1.56 | -0.71 | 0.75 | 2.08 | 2.91 |
| PITCH | -2.129 | -0.162 | -0.049 | 0.089 | 0.188 | 0.227 | 3.597 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -0.950 | -0.501 | -0.301 | -0.184 | 0.273 | 0.537 | 0.786 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_FEP1_ACTEL | 1 | -2.94 | 2.00 |
| TMP_FEP1_ACTEL | 99 | 2.91 | 2.00 |
| PITCH | 99 | 3.597 | 3.00 |
TMP_FEP1_ACTEL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: FEP1_ACTEL residual histograms include only points where TMP_FEP1_ACTEL > 20.0 degC.
Red = telemetry, blue = model
