-------------------------------------------------
ACIS LOAD REVIEW OUTPUT:
FOR REVIEW BY CXC ACIS OPS PERSONNEL
-------------------------------------------------
USING /data/acis/LoadReviews/2024/JAN2224/oflsa/CR021_2103.backstop
LOAD HISTORY FROM: /data/acis/LoadReviews/2024/JAN1524/ofls/ACIS-History.txt
-- CHANDRA LOAD START --
CHANDRA STATUS ARRAY AT START OF LOAD REVIEW (FROM PREVIOUS LOAD HISTORY FILE):
(FP SI,HETG status,LETG status,current OBSID,RadMon status,current TLM FMT,Dither)
= (ACIS-S,HETG-OUT,LETG-OUT,26826,OORMPEN,CSELFMT2,ENAB)
2024:021:21:48:38.754 13560643 SIMTRANS -50504 (HRC-I)
2024:021:21:51:38.754 13561345 COMMAND_HW CSELFMT6
2024:021:21:51:38.754 13561345 MP_OBSID 29142
LATEST OCAT INFO FOR OBSID 29142:
No ACIS info found for obsid 29142.
This is an HRC-I observation.
2024:021:21:51:38.754 13561345 ACISPKT AA00000000
2024:021:21:51:42.754 13561361 ACISPKT AA00000000
2024:021:21:51:46.754 13561376 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:021:21:52:10.754 13561470 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2024:021:21:52:13.093 13561479 COMMAND_SW 4OLETGIN
2024:021:21:53:08.154 13561694 SIMFOCUS -716
2024:021:21:53:13.754 13561716 ACISPKT RS_0000001
2024:021:21:53:17.754 13561732 ACISPKT RH_0000001
2024:021:21:53:40.754 13561821 ACISPKT WT00D96014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00d96014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 3 # BEP_TE_MODE_EVHIST
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 65535
2024:021:21:53:44.754 13561837 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-IN,29142,OORMPEN,CSELFMT6,ENAB)
2024:021:21:55:56.554 13562351 COMMAND_HW CSELFMT1
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2024:021:22:05:52.846 13564678 AOENDITH AOENDITH
==> DITHER ENABLED
2024:021:22:26:09.754 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2024:021:23:04:23.754 13578379 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 70.65 minutes AFTER A START SCIENCE.
2024:021:23:04:35.754 215PCAOF command: HRC Observation Ends
2024:021:23:04:35.754 13578426 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:021:23:04:37.754 13578434 COMMAND_HW CSELFMT6
2024:021:23:04:37.754 13578434 MP_OBSID 27401
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 27401:
Target Name: [ZCA2021] BOSS1244 SW SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 13.5 Remaining Exposure time: 13.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:021:23:05:12.093 13578568 COMMAND_SW 4OLETGRE
2024:021:23:08:55.554 13579440 COMMAND_HW CSELFMT2
2024:021:23:09:17.154 13579524 SIMFOCUS -486
2024:021:23:09:28.354 13579568 ACISPKT AA00000000
2024:021:23:09:32.354 13579584 ACISPKT AA00000000
2024:021:23:09:36.354 13579599 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:021:23:10:00.354 13579693 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2024:021:23:10:38.554 13579842 SIMFOCUS -536
2024:021:23:11:03.354 13579939 ACISPKT WT00458034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00458034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:021:23:11:07.354 13579954 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27401
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458B is WT00458034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27401,OORMPEN,CSELFMT2,ENAB)
2024:021:23:11:11.354 13579970 ACISPKT RS_0000001
2024:021:23:11:15.354 13579986 ACISPKT RH_0000001
2024:021:23:12:55.736 13580377 AOENDITH AOENDITH
==> DITHER ENABLED
2024:022:01:10:01.285 REAL-TIME COMM BEGINS 2024:21:20:10:01.285 EST
2024:022:02:40:01.285 REAL-TIME COMM ENDS 2024:21:21:40:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:022:03:29:26.259 13640438 ACISPKT AA00000000
==> ACIS integration time of 14.14 ks.
This is 104.75% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:022:03:29:26.259 13640438 SIMTRANS -99616 (HRC-S)
2024:022:03:32:26.259 13641140 COMMAND_HW CSELFMT6
2024:022:03:32:26.259 13641140 MP_OBSID 43768
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43768:
No ocat info found for obsid 43768
2024:022:03:33:00.598 13641274 COMMAND_SW 4OHETGIN
2024:022:03:35:26.659 13641844 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_00B26
2024:022:03:35:26.659 13641844 ACISPKT AA00000000
2024:022:03:35:30.659 13641860 ACISPKT AA00000000
2024:022:03:35:34.659 13641876 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:022:03:35:58.659 13641969 ACISPKT WSPOW0AF3F
==> WSPOW COMMAND LOADS: All Feps; I0 I1 I2 I3 S1 S3
2024:022:03:36:44.059 13642146 COMMAND_HW CSELFMT2
2024:022:03:37:01.659 13642215 ACISPKT WT00B26014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00b26014
fepCcdSelect = 3 7 0 1 2 5
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:022:03:37:05.659 13642231 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43768
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00B26B is WT00B26014 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43768,OORMPDS,CSELFMT2,ENAB)
2024:022:03:37:09.659 13642246 ACISPKT RS_0000001
2024:022:03:37:13.659 13642262 ACISPKT RH_0000001
2024:022:04:27:37.343 13654062 MP_OBSID 43767
==> ObsID change occurs 52.1 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43767:
No ocat info found for obsid 43767
2024:022:05:40:59.531 13671241 ACISPKT AA00000000
==> ACIS integration time of 6.03 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:022:05:43:59.531 13671943 ACISPKT AA00000000
2024:022:05:43:59.531 13671943 ORBPOINT EEF1000
==> Entry leg pad time is 7.71 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 022:05:43:59
from CRM file: EE1RADZ0 = 022:05:43:59
==> CRM Pad Time: 7.713 ks and Backstop Pad Time: 7.71 ks agree.
2024:022:05:44:08.531 13671978 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2024:022:05:45:11.531 13672224 ACISPKT RS_0000001
2024:022:08:56:09.748 13716939 MP_OBSID 43766
LATEST OCAT INFO FOR OBSID 43766:
No ocat info found for obsid 43766
2024:022:09:48:51.000 13729276 MP_OBSID 43765
LATEST OCAT INFO FOR OBSID 43765:
No ocat info found for obsid 43765
2024:022:10:14:06.786 13734855 ORBPOINT EPERIGEE
2024:022:10:37:30.000 13740667 MP_OBSID 43764
LATEST OCAT INFO FOR OBSID 43764:
No ocat info found for obsid 43764
2024:022:11:02:21.000 13746486 MP_OBSID 43763
LATEST OCAT INFO FOR OBSID 43763:
No ocat info found for obsid 43763
2024:022:11:55:01.285 REAL-TIME COMM BEGINS 2024:022:06:55:01.285 EST
2024:022:12:31:59.531 13767475 ACISPKT RBTXINGBLL
2024:022:12:41:59.531 13769817 ACISPKT AA00000000
2024:022:12:41:59.531 13769817 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AC
>>>ERROR: Time delta between XE1RADZ0/XEF1000 and EPERIGEE is less than 3.25 hrs.
2024:022:12:42:03.531 13769832 ACISPKT AA00000000
2024:022:12:42:07.531 13769848 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:022:12:42:31.531 13769941 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2024:022:12:43:34.531 13770187 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:022:12:43:38.531 13770203 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43763
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43763,OORMPDS,CSELFMT2,ENAB)
2024:022:12:43:42.531 13770218 ACISPKT RS_0000001
2024:022:12:43:46.531 13770234 ACISPKT RH_0000001
2024:022:13:03:04.288 13774752 MP_OBSID 43762
==> ObsID change occurs 21.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43762:
No ocat info found for obsid 43762
2024:022:13:25:01.285 REAL-TIME COMM ENDS 2024:022:08:25:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:022:15:16:39.496 13806031 COMMAND_HW CSELFMT6
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2024:022:15:17:13.835 13806165 COMMAND_SW 4OHETGRE
2024:022:15:20:57.296 13807037 COMMAND_HW CSELFMT2
2024:022:15:25:39.531 13808138 ACISPKT AA00000000
==> ACIS integration time of 0.51 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:022:15:28:38.531 13808837 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 022:12:41:59
from CRM file: XE1RADZ0 = 022:12:41:59
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2024:022:15:28:39.531 13808841 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:022:15:28:39.531 13808841 ACISPKT AA00000000
2024:022:15:28:40.531 13808845 MP_OBSID 26787
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 26787:
Target Name: 2MASX J13003807+5454367 SI Mode: TE_00A02
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 30 Remaining Exposure time: 30
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:022:15:28:43.531 13808857 ACISPKT AA00000000
2024:022:15:28:47.531 13808872 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:022:15:29:11.531 13808966 ACISPKT WSPOW0CC1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I2 I3 S2 S3
2024:022:15:30:14.531 13809212 ACISPKT WT00A02024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00a02024
fepCcdSelect = 10 7 6 3 2 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:022:15:30:18.531 13809227 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 26787
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00A02B is WT00A02024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,26787,OORMPEN,CSELFMT2,ENAB)
2024:022:15:30:22.531 13809243 ACISPKT RS_0000001
2024:022:15:30:26.531 13809258 ACISPKT RH_0000001
2024:022:15:34:16.931 13810158 SIMFOCUS -418
2024:022:15:35:36.331 13810467 SIMFOCUS -468
2024:022:19:40:01.285 REAL-TIME COMM BEGINS 2024:022:14:40:01.285 EST
2024:022:21:10:01.285 REAL-TIME COMM ENDS 2024:022:16:10:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:023:00:10:56.531 13931132 ACISPKT AA00000000
==> ACIS integration time of 30.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:023:00:13:56.531 13931834 MP_OBSID 27216
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27216:
Target Name: ACT-CL J0947.9-0120 SI Mode: TE_006CC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 12.5 Remaining Exposure time: 12.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:023:00:25:48.857 13934614 ACISPKT AA00000000
2024:023:00:25:52.857 13934630 ACISPKT AA00000000
2024:023:00:25:56.857 13934645 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:023:00:26:20.857 13934739 ACISPKT WSPOW0CC1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I2 I3 S2 S3
2024:023:00:27:23.857 13934985 ACISPKT WT006CC034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006cc034
fepCcdSelect = 10 7 6 3 2 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:023:00:27:27.857 13935000 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27216
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006CCB is WT006CC034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,27216,OORMPEN,CSELFMT2,ENAB)
2024:023:00:27:31.857 13935016 ACISPKT RS_0000001
2024:023:00:27:35.857 13935031 ACISPKT RH_0000001
2024:023:03:30:01.285 REAL-TIME COMM BEGINS 2024:22:22:30:01.285 EST
2024:023:04:16:25.857 13988612 ACISPKT AA00000000
==> ACIS integration time of 12.50 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:023:04:16:25.857 13988612 SIMTRANS -50504 (HRC-I)
2024:023:04:19:25.857 13989314 COMMAND_HW CSELFMT1
2024:023:04:19:25.857 13989314 MP_OBSID 26963
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 26963:
No ACIS info found for obsid 26963.
This is an HRC-I observation.
2024:023:04:19:25.857 13989314 ACISPKT AA00000000
2024:023:04:19:29.857 13989330 ACISPKT AA00000000
2024:023:04:19:33.857 13989346 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:023:04:19:57.857 13989439 ACISPKT WSPOW08812
==> WSPOW COMMAND LOADS: Feps 1 4; I3 S3
2024:023:04:20:55.257 13989663 SIMFOCUS -716
2024:023:04:21:00.857 13989685 ACISPKT RS_0000001
2024:023:04:21:04.857 13989701 ACISPKT RH_0000001
2024:023:04:21:27.857 13989790 ACISPKT WT00D96014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00d96014
fepCcdSelect = 10 7 10 10 3 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 3 # BEP_TE_MODE_EVHIST
recomputeBias = 1
trickleBias = 0
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 33
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 0
eventAmplitudeRange = 65535
windowSlotIndex = 65535
2024:023:04:21:31.857 13989806 ACISPKT XTZ0000005
====> CHANDRA STATUS ARRAY=(HRC-I,HETG-OUT,LETG-OUT,26963,OORMPEN,CSELFMT1,ENAB)
2024:023:04:44:11.529 13995112 AOENDITH AOENDITH
==> DITHER ENABLED
2024:023:04:53:56.857 SCS-134 Activation: HRC Observation Begun
Time between SI Mode load start and SCS-134 activation is good:
Required Delta T: 2071.0 Actual Delta T: 2071.0
2024:023:05:00:01.285 REAL-TIME COMM ENDS 2024:023:00:00:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:023:06:28:50.857 14019617 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
>>>ERROR: SIM TRANSLATION OCCURS 127.32 minutes AFTER A START SCIENCE.
2024:023:06:29:02.857 215PCAOF command: HRC Observation Ends
2024:023:06:29:02.857 14019664 ACISPKT AA00000000
==> ACIS integration time of 0.01 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:023:06:29:04.857 14019671 COMMAND_HW CSELFMT2
2024:023:06:29:04.857 14019671 MP_OBSID 29220
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 29220:
Target Name: [ZCA2021] BOSS1244 SW SI Mode: TE_00458
Instrument: ACIS-I Grating: NONE Type: GTO
Exposure Time: 14 Remaining Exposure time: 14
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNYNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
ACISPKT AND/OR POWER COMMAND ERROR:
2024:023:06:29:04.85 ACISPKT Rule #0 - ERROR Less than 4 second delay between consecutive ACISPKT commands
2024:023:06:29:04.857 14019671 ACISPKT AA00000000
2024:023:06:29:08.857 14019687 ACISPKT AA00000000
ACISPKT AND/OR POWER COMMAND ERROR:
2024:023:06:29:12.85 ACISPKT Rule #1 - ERROR LESS THAN 3 min delay between first AA00 and WSPOW
2024:023:06:29:12.857 14019703 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:023:06:29:36.857 14019796 ACISPKT WSPOW04F3E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4 5; I0 I1 I2 I3 S2
2024:023:06:30:39.857 14020042 ACISPKT WT00458034
ACIS PBLOCK LOADS:
parameterBlockId = 0x00458034
fepCcdSelect = 10 3 2 1 0 6
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:023:06:30:43.857 14020058 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29220
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00458B is WT00458034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29220,OORMPEN,CSELFMT2,ENAB)
2024:023:06:30:47.857 14020073 ACISPKT RS_0000001
2024:023:06:30:51.857 14020089 ACISPKT RH_0000001
2024:023:06:33:44.257 14020762 SIMFOCUS -486
2024:023:06:35:05.657 14021079 SIMFOCUS -536
2024:023:06:44:57.810 14023390 AOENDITH AOENDITH
==> DITHER ENABLED
2024:023:11:03:21.857 14083894 ACISPKT AA00000000
==> ACIS integration time of 15.00 ks.
This is 107.14% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:023:11:03:21.857 14083894 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:023:11:05:21.257 14084360 SIMFOCUS -418
2024:023:11:06:21.857 14084596 MP_OBSID 26859
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 26859:
Target Name: SDSS J092045.60+193327.5 SI Mode: TE_004A4
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 5.1 Remaining Exposure time: 5.1
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:023:11:06:21.857 14084596 ACISPKT AA00000000
2024:023:11:06:25.857 14084612 ACISPKT AA00000000
2024:023:11:06:29.857 14084628 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:023:11:06:40.657 14084670 SIMFOCUS -468
2024:023:11:06:53.857 14084721 ACISPKT WSPOW1EC3F
==> WSPOW COMMAND LOADS: All Feps; I2 I3 S1 S2 S3 S4
2024:023:11:07:56.857 14084967 ACISPKT WT004A4034
ACIS PBLOCK LOADS:
parameterBlockId = 0x004a4034
fepCcdSelect = 2 7 5 6 3 8
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:023:11:08:00.857 14084983 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 26859
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_004A4B is WT004A4034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,26859,OORMPEN,CSELFMT2,ENAB)
2024:023:11:08:04.857 14084998 ACISPKT RS_0000001
2024:023:11:08:08.857 14085014 ACISPKT RH_0000001
2024:023:13:01:21.857 14111523 ACISPKT AA00000000
==> ACIS integration time of 5.40 ks.
This is 105.88% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:023:13:04:21.857 14112226 MP_OBSID 26721
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 26721:
Target Name: FIRST J142738.5+331241 SI Mode: TE_005C6
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 19 Remaining Exposure time: 19
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:023:13:12:09.448 14114050 ACISPKT AA00000000
2024:023:13:12:13.448 14114066 ACISPKT AA00000000
2024:023:13:12:17.448 14114082 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:023:13:12:41.448 14114175 ACISPKT WSPOW1C00E
==> WSPOW COMMAND LOADS: Feps 1 2 3; S2 S3 S4
2024:023:13:13:44.448 14114421 ACISPKT WT005C6024
ACIS PBLOCK LOADS:
parameterBlockId = 0x005c6024
fepCcdSelect = 10 7 6 8 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:023:13:13:48.448 14114437 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 26721
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_005C6B is WT005C6024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,26721,OORMPEN,CSELFMT2,ENAB)
2024:023:13:13:52.448 14114452 ACISPKT RS_0000001
2024:023:13:13:56.448 14114468 ACISPKT RH_0000001
2024:023:13:45:01.285 REAL-TIME COMM BEGINS 2024:023:08:45:01.285 EST
2024:023:16:15:01.285 REAL-TIME COMM ENDS 2024:023:11:15:01.285 EST
==> COMM DURATION: 150.00 mins.
2024:023:17:58:26.973 14181069 ORBPOINT EAPOGEE
2024:023:18:49:42.448 14193086 ACISPKT AA00000000
==> ACIS integration time of 19.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:023:18:52:42.448 14193789 MP_OBSID 29073
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29073:
Target Name: WISEA J092637.18+402030.5 SI Mode: TE_00A5A
Instrument: ACIS-S Grating: NONE Type: GTO
Exposure Time: 14.1 Remaining Exposure time: 14.1
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:023:18:57:55.248 14195010 ACISPKT AA00000000
2024:023:18:57:59.248 14195025 ACISPKT AA00000000
2024:023:18:58:03.248 14195041 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:023:18:58:27.248 14195134 ACISPKT WSPOW0C80E
==> WSPOW COMMAND LOADS: Feps 1 2 3; I3 S2 S3
2024:023:18:59:30.248 14195380 ACISPKT WT00A5A024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00a5a024
fepCcdSelect = 10 7 6 3 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:023:18:59:34.248 14195396 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29073
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00A5AB is WT00A5A024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29073,OORMPEN,CSELFMT2,ENAB)
2024:023:18:59:38.248 14195412 ACISPKT RS_0000001
2024:023:18:59:42.248 14195427 ACISPKT RH_0000001
2024:023:23:32:08.248 14259216 ACISPKT AA00000000
==> ACIS integration time of 15.20 ks.
This is 107.80% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:023:23:35:08.248 14259919 MP_OBSID 26725
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 26725:
Target Name: WISEA J132104.22+460637.6 SI Mode: TE_00A5A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 30.2 Remaining Exposure time: 30.2
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:023:23:55:24.865 14264667 ACISPKT WSVIDALLDN
2024:023:23:55:42.865 14264737 ACISPKT WSPOW0C80E
==> WSPOW COMMAND LOADS: Feps 1 2 3; I3 S2 S3
2024:023:23:56:45.865 14264983 ACISPKT WT00A5B024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00a5b024
fepCcdSelect = 10 7 6 3 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:023:23:56:49.865 14264998 ACISPKT RS_0000001
2024:023:23:56:53.865 14265014 ACISPKT RH_0000001
2024:023:23:57:16.865 14265104 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 26725
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00A5A is WT00A5B024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,26725,OORMPEN,CSELFMT2,ENAB)
2024:024:04:20:01.285 REAL-TIME COMM BEGINS 2024:23:23:20:01.285 EST
2024:024:05:35:01.285 REAL-TIME COMM ENDS 2024:024:00:35:01.285 EST
==> COMM DURATION: 75.00 mins.
2024:024:08:09:03.865 14380253 ACISPKT AA00000000
==> ACIS integration time of 29.51 ks.
This is 97.71% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:024:08:12:03.865 14380955 MP_OBSID 28221
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28221:
Target Name: WISEA J083354.40+261210.3 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 2 Remaining Exposure time: 2
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:024:08:20:58.092 14383040 ACISPKT AA00000000
2024:024:08:21:02.092 14383056 ACISPKT AA00000000
2024:024:08:21:06.092 14383071 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:024:08:21:30.092 14383165 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:024:08:22:33.092 14383411 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:024:08:22:37.092 14383426 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28221
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28221,OORMPEN,CSELFMT2,ENAB)
2024:024:08:22:41.092 14383442 ACISPKT RS_0000001
2024:024:08:22:45.092 14383458 ACISPKT RH_0000001
2024:024:09:13:49.092 14395415 ACISPKT AA00000000
==> ACIS integration time of 2.10 ks.
This is 105.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:024:09:16:49.092 14396117 MP_OBSID 29211
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29211:
Target Name: FIRST J142738.5+331241 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 13 Remaining Exposure time: 13
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:024:09:45:11.924 14402762 ACISPKT WSVIDALLDN
2024:024:09:45:29.924 14402833 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:024:09:46:32.924 14403079 ACISPKT WT0057B034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057b034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:024:09:46:36.924 14403094 ACISPKT RS_0000001
2024:024:09:46:40.924 14403110 ACISPKT RH_0000001
2024:024:09:47:03.924 14403199 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29211
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057A is WT0057B034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29211,OORMPEN,CSELFMT2,ENAB)
2024:024:13:30:30.924 14455519 ACISPKT AA00000000
==> ACIS integration time of 13.41 ks.
This is 103.13% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:024:13:33:30.924 14456222 MP_OBSID 27218
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27218:
Target Name: ACT-CL J0947.9-0120 SI Mode: TE_006CC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 18 Remaining Exposure time: 18
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:024:13:43:41.649 14458605 ACISPKT AA00000000
2024:024:13:43:45.649 14458621 ACISPKT AA00000000
2024:024:13:43:49.649 14458636 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:024:13:44:13.649 14458730 ACISPKT WSPOW0CC1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I2 I3 S2 S3
2024:024:13:45:16.649 14458976 ACISPKT WT006CC034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006cc034
fepCcdSelect = 10 7 6 3 2 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:024:13:45:20.649 14458992 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27218
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006CCB is WT006CC034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,27218,OORMPEN,CSELFMT2,ENAB)
2024:024:13:45:24.649 14459007 ACISPKT RS_0000001
2024:024:13:45:28.649 14459023 ACISPKT RH_0000001
2024:024:14:40:01.285 REAL-TIME COMM BEGINS 2024:024:09:40:01.285 EST
2024:024:16:10:01.285 REAL-TIME COMM ENDS 2024:024:11:10:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:024:19:07:37.750 14534453 ACISPKT AA00000000
==> ACIS integration time of 18.10 ks.
This is 100.55% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:024:19:07:37.750 14534453 SIMTRANS -99616 (HRC-S)
2024:024:19:10:37.750 14535156 COMMAND_HW CSELFMT6
2024:024:19:10:37.750 14535156 MP_OBSID 43761
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43761:
No ocat info found for obsid 43761
2024:024:19:11:12.089 14535290 COMMAND_SW 4OHETGIN
2024:024:19:13:15.150 14535770 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AE
2024:024:19:13:15.150 14535770 ACISPKT AA00000000
2024:024:19:13:19.150 14535786 ACISPKT AA00000000
2024:024:19:13:23.150 14535801 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:024:19:13:47.150 14535895 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2024:024:19:14:50.150 14536141 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:024:19:14:54.150 14536156 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43761
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
>>>ERROR: WE ARE DOING A CTI MEASUREMENT BUT WE ARE NOT IN FMT 2!
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43761,OORMPDS,CSELFMT6,ENAB)
2024:024:19:14:55.550 14536162 COMMAND_HW CSELFMT2
2024:024:19:14:58.150 14536172 ACISPKT RS_0000001
2024:024:19:15:02.150 14536188 ACISPKT RH_0000001
2024:024:19:49:04.754 14544159 COMMAND_HW CSELFMT6
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2024:024:19:53:18.754 14545150 COMMAND_HW CSELFMT2
2024:024:20:06:45.676 14548299 MP_OBSID 43760
==> ObsID change occurs 53.4 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43760:
No ocat info found for obsid 43760
2024:024:20:44:29.444 14557133 MP_OBSID 43759
LATEST OCAT INFO FOR OBSID 43759:
No ocat info found for obsid 43759
2024:024:21:56:55.150 14574092 ACISPKT AA00000000
==> ACIS integration time of 8.32 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:024:21:59:55.150 14574795 ACISPKT AA00000000
2024:024:21:59:55.150 14574795 ORBPOINT EEF1000
==> Entry leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 024:21:59:55
from CRM file: EE1RADZ0 = 024:21:59:55
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2024:024:22:00:04.150 14574830 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2024:024:22:01:07.150 14575075 ACISPKT RS_0000001
2024:024:23:57:42.762 14602375 MP_OBSID 43758
LATEST OCAT INFO FOR OBSID 43758:
No ocat info found for obsid 43758
2024:025:01:17:00.000 14620940 MP_OBSID 43757
LATEST OCAT INFO FOR OBSID 43757:
No ocat info found for obsid 43757
2024:025:01:43:25.149 14626850 ORBPOINT EPERIGEE
>>>ERROR: Time delta between EE1RADZ0/EEF1000 and EPERIGEE is less than 4.0 hrs.
2024:025:02:06:30.000 14632531 MP_OBSID 43756
LATEST OCAT INFO FOR OBSID 43756:
No ocat info found for obsid 43756
2024:025:02:31:21.000 14638349 MP_OBSID 43755
LATEST OCAT INFO FOR OBSID 43755:
No ocat info found for obsid 43755
2024:025:03:00:01.542 REAL-TIME COMM BEGINS 2024:24:22:00:01.542 EST
2024:025:03:56:52.372 14658374 MP_OBSID 43754
LATEST OCAT INFO FOR OBSID 43754:
No ocat info found for obsid 43754
2024:025:04:30:01.542 REAL-TIME COMM ENDS 2024:24:23:30:01.542 EST
==> COMM DURATION: 90.00 mins.
2024:025:04:51:55.150 14671263 ACISPKT RBTXINGBLL
2024:025:05:01:55.150 14671263 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_00B26
2024:025:06:47:38.689 14698360 COMMAND_HW CSELFMT6
2024:025:06:48:13.028 14698494 COMMAND_SW 4OHETGRE
2024:025:06:51:56.489 14699366 COMMAND_HW CSELFMT2
2024:025:07:03:21.278 14702038 COMMAND_SW OORMPEN
==> Exit leg pad time is 7.29 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 025:05:01:55
from CRM file: XE1RADZ0 = 025:05:01:55
>>>CRM Pad Time: 0 ks and Backstop Pad Time: 7.29 ks do not agree!!
This could be due to extended CTI measurement
-OR- error in the load.
>>>ERROR: RADMON occurs 543.44 min AFTER stop science.
2024:025:07:03:22.278 14702042 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:025:07:03:22.278 14702042 ACISPKT AA00000000
2024:025:07:03:23.278 14702046 MP_OBSID 29212
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 29212:
Target Name: FIRST J142738.5+331241 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 27 Remaining Exposure time: 27
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:025:07:03:26.278 14702057 ACISPKT AA00000000
2024:025:07:03:30.278 14702073 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:025:07:03:54.278 14702167 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:025:07:04:57.278 14702413 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:025:07:05:01.278 14702428 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29212
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29212,OORMPEN,CSELFMT2,ENAB)
>>> Warning - Long Dwell: 2024:025:07:05:01.278 Dwell time: 32886.1 seconds
2024:025:07:05:05.278 14702444 ACISPKT RS_0000001
2024:025:07:05:09.278 14702459 ACISPKT RH_0000001
2024:025:14:25:01.285 REAL-TIME COMM BEGINS 2024:025:09:25:01.285 EST
2024:025:14:42:53.278 14809636 ACISPKT AA00000000
==> ACIS integration time of 26.50 ks.
This is 98.15% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:025:14:45:53.278 14810338 MP_OBSID 29209
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29209:
Target Name: SDSSJ084824.14+165701.5 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: CCT
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:025:15:16:46.427 14817570 ACISPKT WSVIDALLDN
2024:025:15:17:04.427 14817640 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:025:15:18:07.427 14817886 ACISPKT WT0057B034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057b034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:025:15:18:11.427 14817902 ACISPKT RS_0000001
2024:025:15:18:15.427 14817918 ACISPKT RH_0000001
2024:025:15:18:38.427 14818007 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29209
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057A is WT0057B034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29209,OORMPEN,CSELFMT2,ENAB)
2024:025:15:55:01.285 REAL-TIME COMM ENDS 2024:025:10:55:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:025:18:05:25.427 14857059 ACISPKT AA00000000
==> ACIS integration time of 10.01 ks.
This is 100.07% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:025:18:05:25.427 14857059 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:025:18:07:24.827 14857525 SIMFOCUS -536
2024:025:18:08:25.427 14857761 MP_OBSID 27043
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27043:
Target Name: NGC 6242 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 12 Remaining Exposure time: 12
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:025:18:26:30.641 14861996 ACISPKT AA00000000
2024:025:18:26:34.641 14862012 ACISPKT AA00000000
2024:025:18:26:38.641 14862028 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:025:18:27:02.641 14862121 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:025:18:28:05.641 14862367 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:025:18:28:09.641 14862383 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27043
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27043,OORMPEN,CSELFMT2,ENAB)
2024:025:18:28:13.641 14862398 ACISPKT RS_0000001
2024:025:18:28:17.641 14862414 ACISPKT RH_0000001
2024:025:18:45:01.285 REAL-TIME COMM BEGINS 2024:025:13:45:01.285 EST
2024:025:20:15:01.285 REAL-TIME COMM ENDS 2024:025:15:15:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:025:22:00:27.641 14912092 ACISPKT AA00000000
==> ACIS integration time of 11.50 ks.
This is 95.83% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:025:22:00:27.641 14912092 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:025:22:02:27.041 14912558 SIMFOCUS -418
2024:025:22:03:27.641 14912794 MP_OBSID 29221
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29221:
Target Name: SDSSJ084824.14+165701.5 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: CCT
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:025:22:03:46.441 14912868 SIMFOCUS -468
2024:025:22:25:58.269 14918065 ACISPKT AA00000000
2024:025:22:26:02.269 14918081 ACISPKT AA00000000
2024:025:22:26:06.269 14918096 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:025:22:26:30.269 14918190 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:025:22:27:33.269 14918436 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:025:22:27:37.269 14918452 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29221
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29221,OORMPEN,CSELFMT2,ENAB)
2024:025:22:27:41.269 14918467 ACISPKT RS_0000001
2024:025:22:27:45.269 14918483 ACISPKT RH_0000001
2024:026:01:41:19.269 14963806 ACISPKT AA00000000
==> ACIS integration time of 10.65 ks.
This is 106.50% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:026:01:44:19.269 14964508 MP_OBSID 43753
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43753:
No ocat info found for obsid 43753
2024:026:02:06:17.328 14969652 MP_OBSID 27209
LATEST OCAT INFO FOR OBSID 27209:
Target Name: zwcl 1856.8+6616 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 20 Remaining Exposure time: 20
Offset: Y: -3 Z: -2.5 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:026:02:06:17.328 14969652 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:026:02:08:16.728 14970118 SIMFOCUS -536
2024:026:02:16:33.889 14972058 ACISPKT AA00000000
2024:026:02:16:37.889 14972073 ACISPKT AA00000000
2024:026:02:16:41.889 14972089 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:026:02:17:05.889 14972183 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:026:02:18:08.889 14972429 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:026:02:18:12.889 14972444 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27209
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27209,OORMPEN,CSELFMT2,ENAB)
2024:026:02:18:16.889 14972460 ACISPKT RS_0000001
2024:026:02:18:20.889 14972475 ACISPKT RH_0000001
2024:026:03:30:01.285 REAL-TIME COMM BEGINS 2024:25:22:30:01.285 EST
2024:026:05:00:01.285 REAL-TIME COMM ENDS 2024:026:00:00:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:026:07:57:10.889 15051812 ACISPKT AA00000000
==> ACIS integration time of 19.10 ks.
This is 95.50% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:026:08:00:10.889 15052514 MP_OBSID 43752
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43752:
No ocat info found for obsid 43752
2024:026:08:24:02.117 15058100 MP_OBSID 29218
LATEST OCAT INFO FOR OBSID 29218:
Target Name: ACT-CL J0947.9-0120 SI Mode: TE_006CC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:026:08:24:02.117 15058100 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:026:08:26:01.517 15058566 SIMFOCUS -418
2024:026:08:27:20.917 15058876 SIMFOCUS -468
2024:026:08:33:01.643 15060205 ACISPKT AA00000000
2024:026:08:33:05.643 15060221 ACISPKT AA00000000
2024:026:08:33:09.643 15060236 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:026:08:33:33.643 15060330 ACISPKT WSPOW0CC1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I2 I3 S2 S3
2024:026:08:34:36.643 15060576 ACISPKT WT006CC034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006cc034
fepCcdSelect = 10 7 6 3 2 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:026:08:34:40.643 15060592 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29218
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006CCB is WT006CC034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29218,OORMPEN,CSELFMT2,ENAB)
2024:026:08:34:44.643 15060607 ACISPKT RS_0000001
2024:026:08:34:48.643 15060623 ACISPKT RH_0000001
2024:026:09:27:23.713 15072915 ORBPOINT EAPOGEE
2024:026:11:46:58.643 15105618 ACISPKT AA00000000
==> ACIS integration time of 10.30 ks.
This is 103.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:026:11:49:58.643 15106320 MP_OBSID 43751
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43751:
No ocat info found for obsid 43751
2024:026:12:22:31.502 15113941 MP_OBSID 29072
LATEST OCAT INFO FOR OBSID 29072:
Target Name: NGC 1068 SI Mode: TE_00D76
Instrument: ACIS-S Grating: NONE Type: DDT
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: CUSTOM Start: 440 Rows: 146 Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.002222 deg Z Freq: 0.360000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:026:12:38:44.866 15117740 ACISPKT AA00000000
2024:026:12:38:48.866 15117755 ACISPKT AA00000000
2024:026:12:38:52.866 15117771 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:026:12:39:16.866 15117865 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:026:12:40:19.866 15118110 ACISPKT WT00D76014
ACIS PBLOCK LOADS:
parameterBlockId = 0x00d76014
fepCcdSelect = 10 7 6 10 10 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 439
subarrayRowCount = 145
primaryExposure = 5
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:026:12:40:23.866 15118126 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29072
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00D76B is WT00D76014 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29072,OORMPEN,CSELFMT2,ENAB)
2024:026:12:40:27.866 15118142 ACISPKT RS_0000001
2024:026:12:40:31.866 15118157 ACISPKT RH_0000001
2024:026:12:44:56.866 15119191 AOENDITH AOENDITH
==> DITHER ENABLED
2024:026:13:25:01.285 REAL-TIME COMM BEGINS 2024:026:08:25:01.285 EST
2024:026:14:55:01.285 REAL-TIME COMM ENDS 2024:026:09:55:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:026:15:38:06.866 15159738 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:026:15:41:06.866 15160440 MP_OBSID 28220
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 28220:
Target Name: WISEA J053036.98-373010.7 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 2 Remaining Exposure time: 2
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:026:15:47:58.760 15162048 ACISPKT AA00000000
2024:026:15:48:02.760 15162063 ACISPKT AA00000000
2024:026:15:48:06.760 15162079 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:026:15:48:30.760 15162172 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:026:15:49:33.760 15162418 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:026:15:49:37.760 15162434 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28220
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28220,OORMPEN,CSELFMT2,ENAB)
2024:026:15:49:41.760 15162450 ACISPKT RS_0000001
2024:026:15:49:45.760 15162465 ACISPKT RH_0000001
2024:026:15:59:19.760 15164705 AOENDITH AOENDITH
==> DITHER ENABLED
2024:026:16:39:09.760 15174032 ACISPKT AA00000000
==> ACIS integration time of 2.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:026:16:42:09.760 15174734 MP_OBSID 43750
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43750:
No ocat info found for obsid 43750
2024:026:16:59:30.449 15178796 MP_OBSID 29210
LATEST OCAT INFO FOR OBSID 29210:
Target Name: SDSSJ085302.12+183259.5 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: CCT
Exposure Time: 9.5 Remaining Exposure time: 9.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:026:17:33:40.341 15186795 ACISPKT WSVIDALLDN
2024:026:17:33:58.341 15186865 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:026:17:35:01.341 15187111 ACISPKT WT0057B034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057b034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:026:17:35:05.341 15187127 ACISPKT RS_0000001
2024:026:17:35:09.341 15187143 ACISPKT RH_0000001
2024:026:17:35:32.341 15187232 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29210
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057A is WT0057B034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29210,OORMPEN,CSELFMT2,ENAB)
2024:026:20:05:39.341 15222382 ACISPKT AA00000000
==> ACIS integration time of 9.01 ks.
This is 94.81% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:026:20:05:39.341 15222382 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:026:20:07:38.741 15222848 SIMFOCUS -536
2024:026:20:08:39.341 15223084 MP_OBSID 29213
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29213:
Target Name: NGC 6242 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10.4 Remaining Exposure time: 10.4
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:026:20:26:43.996 15227317 ACISPKT AA00000000
2024:026:20:26:47.996 15227332 ACISPKT AA00000000
2024:026:20:26:51.996 15227348 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:026:20:27:15.996 15227442 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:026:20:28:18.996 15227688 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:026:20:28:22.996 15227703 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29213
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29213,OORMPEN,CSELFMT2,ENAB)
2024:026:20:28:26.996 15227719 ACISPKT RS_0000001
2024:026:20:28:30.996 15227734 ACISPKT RH_0000001
2024:026:23:44:00.996 15273510 ACISPKT AA00000000
==> ACIS integration time of 10.50 ks.
This is 100.96% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:026:23:44:00.996 15273510 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:026:23:46:00.396 15273976 SIMFOCUS -418
2024:026:23:47:00.996 15274212 MP_OBSID 29222
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29222:
Target Name: SDSSJ085302.12+183259.5 SI Mode: TE_0057A
Instrument: ACIS-S Grating: NONE Type: CCT
Exposure Time: 10.5 Remaining Exposure time: 10.5
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNNN NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:026:23:47:19.796 15274286 SIMFOCUS -468
2024:027:00:09:53.556 15279569 ACISPKT AA00000000
2024:027:00:09:57.556 15279584 ACISPKT AA00000000
2024:027:00:10:01.556 15279600 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:00:10:25.556 15279694 ACISPKT WSPOW0C006
==> WSPOW COMMAND LOADS: Feps 1 2; S2 S3
2024:027:00:11:28.556 15279939 ACISPKT WT0057A034
ACIS PBLOCK LOADS:
parameterBlockId = 0x0057a034
fepCcdSelect = 10 7 6 10 10 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 30
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:027:00:11:32.556 15279955 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29222
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_0057AB is WT0057A034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29222,OORMPEN,CSELFMT2,ENAB)
2024:027:00:11:36.556 15279971 ACISPKT RS_0000001
2024:027:00:11:40.556 15279986 ACISPKT RH_0000001
2024:027:00:20:01.285 REAL-TIME COMM BEGINS 2024:027:19:20:01.285 EST
2024:027:01:50:01.285 REAL-TIME COMM ENDS 2024:26:20:50:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:027:03:14:24.556 15322773 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 95.24% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:027:03:14:24.556 15322773 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:027:03:16:23.956 15323239 SIMFOCUS -536
2024:027:03:17:24.556 15323475 MP_OBSID 29214
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29214:
Target Name: NGC 6242 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:027:03:35:51.131 15327793 ACISPKT AA00000000
2024:027:03:35:55.131 15327809 ACISPKT AA00000000
2024:027:03:35:59.131 15327825 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:03:36:23.131 15327918 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:027:03:37:26.131 15328164 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:027:03:37:30.131 15328180 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29214
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29214,OORMPEN,CSELFMT2,ENAB)
2024:027:03:37:34.131 15328195 ACISPKT RS_0000001
2024:027:03:37:38.131 15328211 ACISPKT RH_0000001
2024:027:06:51:28.131 15373596 ACISPKT AA00000000
==> ACIS integration time of 10.40 ks.
This is 104.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:027:06:51:28.131 15373596 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:027:06:53:27.531 15374062 SIMFOCUS -418
2024:027:06:54:28.131 15374299 MP_OBSID 29219
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29219:
Target Name: ACT-CL J0947.9-0120 SI Mode: TE_006CC
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 11 Remaining Exposure time: 11
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: NNYY NNYYNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:027:06:54:46.931 15374372 SIMFOCUS -468
2024:027:07:07:22.811 15377322 ACISPKT AA00000000
2024:027:07:07:26.811 15377338 ACISPKT AA00000000
2024:027:07:07:30.811 15377353 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:07:07:54.811 15377447 ACISPKT WSPOW0CC1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I2 I3 S2 S3
2024:027:07:08:57.811 15377693 ACISPKT WT006CC034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006cc034
fepCcdSelect = 10 7 6 3 2 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:027:07:09:01.811 15377708 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29219
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006CCB is WT006CC034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,29219,OORMPEN,CSELFMT2,ENAB)
2024:027:07:09:05.811 15377724 ACISPKT RS_0000001
2024:027:07:09:09.811 15377739 ACISPKT RH_0000001
2024:027:10:27:57.316 15424286 ACISPKT AA00000000
==> ACIS integration time of 10.70 ks.
This is 97.25% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:027:10:27:57.316 15424286 SIMTRANS -99616 (HRC-S)
2024:027:10:30:57.316 15424988 COMMAND_HW CSELFMT6
2024:027:10:30:57.316 15424988 MP_OBSID 43749
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43749:
No ocat info found for obsid 43749
2024:027:10:31:31.655 15425122 COMMAND_SW 4OHETGIN
2024:027:10:33:34.716 15425603 COMMAND_SW OORMPDS
==>The requested SI_MODE for the inbound CTI is TE_007AC
2024:027:10:33:34.716 15425603 ACISPKT AA00000000
2024:027:10:33:38.716 15425618 ACISPKT AA00000000
2024:027:10:33:42.716 15425634 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:10:34:06.716 15425727 ACISPKT WSPOW0CF3F
==> WSPOW COMMAND LOADS: All Feps; std I array
2024:027:10:35:09.716 15425973 ACISPKT WT007AC024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ac024
fepCcdSelect = 3 7 0 1 2 6
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:027:10:35:13.716 15425989 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43749
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007ACB is WT007AC024 and is stored.
>>>ERROR: WE ARE DOING A CTI MEASUREMENT BUT WE ARE NOT IN FMT 2!
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43749,OORMPDS,CSELFMT6,ENAB)
2024:027:10:35:15.116 15425994 COMMAND_HW CSELFMT2
2024:027:10:35:17.716 15426004 ACISPKT RS_0000001
2024:027:10:35:21.716 15426020 ACISPKT RH_0000001
2024:027:11:46:52.464 15442764 MP_OBSID 43748
==> ObsID change occurs 73.2 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43748:
No ocat info found for obsid 43748
2024:027:13:13:07.588 15462960 ACISPKT AA00000000
==> ACIS integration time of 8.07 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:027:13:16:07.588 15463663 ACISPKT AA00000000
2024:027:13:16:07.588 15463663 ORBPOINT EEF1000
==> Entry leg pad time is 9.75 ks.
AE-8 EVENTS TIME CHECK:
from backstop: EE1RADZ0 = 027:13:16:07
from CRM file: EE1RADZ0 = 027:13:16:07
==> CRM Pad Time: 9.753 ks and Backstop Pad Time: 9.75 ks agree.
2024:027:13:16:16.588 15463698 ACISPKT WSPOW0002A
==> WSPOW COMMAND LOADS: Feps 1 3 5; All vids down
2024:027:13:17:19.588 15463943 ACISPKT RS_0000001
2024:027:15:40:01.542 REAL-TIME COMM BEGINS 2024:027:10:40:01.542 EST
2024:027:16:01:17.602 15502336 MP_OBSID 43747
LATEST OCAT INFO FOR OBSID 43747:
No ocat info found for obsid 43747
2024:027:16:47:00.000 15513038 MP_OBSID 43746
LATEST OCAT INFO FOR OBSID 43746:
No ocat info found for obsid 43746
2024:027:17:10:01.542 REAL-TIME COMM ENDS 2024:027:12:10:01.542 EST
==> COMM DURATION: 90.00 mins.
2024:027:17:12:22.276 15518772 ORBPOINT EPERIGEE
>>>ERROR: Time delta between EE1RADZ0/EEF1000 and EPERIGEE is less than 4.0 hrs.
2024:027:17:35:30.000 15524394 MP_OBSID 43745
LATEST OCAT INFO FOR OBSID 43745:
No ocat info found for obsid 43745
2024:027:17:59:41.000 15530056 MP_OBSID 43744
LATEST OCAT INFO FOR OBSID 43744:
No ocat info found for obsid 43744
2024:027:18:25:01.542 REAL-TIME COMM BEGINS 2024:027:13:25:01.542 EST
2024:027:19:55:01.542 REAL-TIME COMM ENDS 2024:027:14:55:01.542 EST
==> COMM DURATION: 90.00 mins.
2024:027:20:01:22.192 15558549 MP_OBSID 43743
LATEST OCAT INFO FOR OBSID 43743:
No ocat info found for obsid 43743
2024:027:20:28:07.588 15564814 ACISPKT RBTXINGBLL
2024:027:20:38:07.588 15567155 ACISPKT AA00000000
2024:027:20:38:07.588 15567155 ORBPOINT XEF1000
==> The requested SI_MODE for the outbound CTI is TE_007AE
2024:027:20:38:11.588 15567171 ACISPKT AA00000000
2024:027:20:38:15.588 15567186 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:20:38:39.588 15567280 ACISPKT WSPOW3F03F
==> WSPOW COMMAND LOADS: All Feps; std S array
2024:027:20:39:42.588 15567526 ACISPKT WT007AE024
ACIS PBLOCK LOADS:
parameterBlockId = 0x007ae024
fepCcdSelect = 9 7 5 6 4 8
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 32
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3750
windowSlotIndex = 65535
2024:027:20:39:46.588 15567542 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 43743
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_007AEB is WT007AE024 and is stored.
====> CHANDRA STATUS ARRAY=(HRC-S,HETG-IN,LETG-OUT,43743,OORMPDS,CSELFMT2,ENAB)
2024:027:20:39:50.588 15567557 ACISPKT RS_0000001
2024:027:20:39:54.588 15567573 ACISPKT RH_0000001
2024:027:21:25:47.615 15578316 MP_OBSID 43742
==> ObsID change occurs 47.6 minutes after stop science.
LATEST OCAT INFO FOR OBSID 43742:
No ocat info found for obsid 43742
2024:027:23:18:24.246 15604684 COMMAND_HW CSELFMT6
>>>ERROR: CHANGE FROM FMT2 OCCURS BEFORE A STOP SCIENCE!
2024:027:23:18:58.585 15604818 COMMAND_SW 4OHETGRE
2024:027:23:21:47.588 15605477 ACISPKT AA00000000
==> ACIS integration time of 0.17 ks.
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI-CTI
2024:027:23:22:42.046 15605690 COMMAND_HW CSELFMT2
2024:027:23:24:46.588 15606176 COMMAND_SW OORMPEN
==> Exit leg pad time is 10.00 ks.
AE-8 EVENTS TIME CHECK:
from backstop: XE1RADZ0 = 027:20:38:07
from CRM file: XE1RADZ0 = 027:20:38:07
==> CRM Pad Time: 10 ks and Backstop Pad Time: 10.00 ks agree.
2024:027:23:24:47.588 15606180 SIMTRANS 75624 (ACIS-S)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:027:23:24:47.588 15606180 ACISPKT AA00000000
2024:027:23:24:48.588 15606183 MP_OBSID 28044
==> ObsID change occurs 0.0 minutes after stop science.
>>>ERROR: ObsID change occurs less than 3 minutes after a stop science command.
LATEST OCAT INFO FOR OBSID 28044:
Target Name: 1eRASS J110059.9-434027 SI Mode: TE_00958
Instrument: ACIS-S Grating: NONE Type: GO
Exposure Time: 20 Remaining Exposure time: 20
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: F Frame Time:
Chips Turned On: NNNN NYYYYN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 25 Obj_Flag: NO
2024:027:23:24:51.588 15606195 ACISPKT AA00000000
2024:027:23:24:55.588 15606211 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:027:23:25:19.588 15606304 ACISPKT WSPOW1E01E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; S1 S2 S3 S4
2024:027:23:26:22.588 15606550 ACISPKT WT00958024
ACIS PBLOCK LOADS:
parameterBlockId = 0x00958024
fepCcdSelect = 10 7 5 6 8 10
fepMode = 2 # FEP_TE_MODE_EV3x3
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:027:23:26:26.588 15606566 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 28044
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_00958B is WT00958024 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-S,HETG-OUT,LETG-OUT,28044,OORMPEN,CSELFMT2,ENAB)
2024:027:23:26:30.588 15606582 ACISPKT RS_0000001
2024:027:23:26:34.588 15606597 ACISPKT RH_0000001
2024:028:03:30:01.285 REAL-TIME COMM BEGINS 2024:27:22:30:01.285 EST
2024:028:05:00:01.285 REAL-TIME COMM ENDS 2024:028:00:00:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:028:05:53:44.588 15697251 ACISPKT AA00000000
==> ACIS integration time of 22.00 ks.
This is 110.00% of the requested time.
==>ERROR: Scheduled time is greater than 110%.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:05:53:44.588 15697251 SIMTRANS 92904 (ACIS-I)
==> THERE IS A Z-SIM OF 0.00 mm FOR THIS OBSERVATION.
2024:028:05:55:43.988 15697717 SIMFOCUS -536
2024:028:05:56:44.588 15697953 MP_OBSID 27148
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27148:
Target Name: 2MASS J08194059+0823581 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:06:03:43.253 15699587 ACISPKT AA00000000
2024:028:06:03:47.253 15699603 ACISPKT AA00000000
2024:028:06:03:51.253 15699618 ACISPKT WSPOW00000
==> WSPOW COMMAND LOADS: All Feps down; All vids down
2024:028:06:04:15.253 15699712 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:028:06:05:18.253 15699958 ACISPKT WT006E6034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e6034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 1
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:06:05:22.253 15699973 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27148
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6B is WT006E6034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27148,OORMPEN,CSELFMT2,ENAB)
2024:028:06:05:26.253 15699989 ACISPKT RS_0000001
2024:028:06:05:30.253 15700005 ACISPKT RH_0000001
2024:028:09:12:40.253 15743829 ACISPKT AA00000000
==> ACIS integration time of 10.00 ks.
This is 100.00% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:09:15:40.253 15744531 MP_OBSID 27073
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 27073:
Target Name: LMC Deep Field 05 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:09:44:37.121 15751309 ACISPKT WSVIDALLDN
2024:028:09:44:55.121 15751380 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:028:09:45:58.121 15751626 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:09:46:02.121 15751641 ACISPKT RS_0000001
2024:028:09:46:06.121 15751657 ACISPKT RH_0000001
2024:028:09:46:29.121 15751747 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 27073
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,27073,OORMPEN,CSELFMT2,ENAB)
2024:028:13:30:01.285 REAL-TIME COMM BEGINS 2024:028:08:30:01.285 EST
2024:028:13:56:36.121 15810310 ACISPKT AA00000000
==> ACIS integration time of 15.01 ks.
This is 100.05% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:13:59:36.121 15811013 MP_OBSID 29216
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29216:
Target Name: 2MASS J08194059+0823581 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:14:28:32.990 15817791 ACISPKT WSVIDALLDN
2024:028:14:28:50.990 15817861 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:028:14:29:53.990 15818107 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:14:29:57.990 15818123 ACISPKT RS_0000001
2024:028:14:30:01.990 15818138 ACISPKT RH_0000001
2024:028:14:30:24.990 15818228 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29216
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29216,OORMPEN,CSELFMT2,ENAB)
2024:028:15:00:01.285 REAL-TIME COMM ENDS 2024:028:10:00:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:028:17:17:11.990 15857280 ACISPKT AA00000000
==> ACIS integration time of 10.01 ks.
This is 100.07% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:17:20:11.990 15857982 MP_OBSID 29215
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29215:
Target Name: LMC Deep Field 05 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 15 Remaining Exposure time: 15
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:17:45:01.285 REAL-TIME COMM BEGINS 2024:028:12:45:01.285 EST
2024:028:17:49:08.921 15864760 ACISPKT WSVIDALLDN
2024:028:17:49:26.921 15864831 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:028:17:50:29.921 15865076 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:17:50:33.921 15865092 ACISPKT RS_0000001
2024:028:17:50:37.921 15865108 ACISPKT RH_0000001
2024:028:17:51:00.921 15865197 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29215
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29215,OORMPEN,CSELFMT2,ENAB)
2024:028:19:15:01.285 REAL-TIME COMM ENDS 2024:028:14:15:01.285 EST
==> COMM DURATION: 90.00 mins.
2024:028:22:01:07.921 15923761 ACISPKT AA00000000
==> ACIS integration time of 15.01 ks.
This is 100.05% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
2024:028:22:04:07.921 15924464 MP_OBSID 29217
==> ObsID change occurs 3.0 minutes after stop science.
LATEST OCAT INFO FOR OBSID 29217:
Target Name: 2MASS J08194059+0823581 SI Mode: TE_006E6
Instrument: ACIS-I Grating: NONE Type: GO
Exposure Time: 10 Remaining Exposure time: 10
Offset: Y: 0 Z: 0 Z-sim:
ACIS Exposure Mode: TE Event TM Format: VF Frame Time:
Chips Turned On: YYYY NNNNNN
Subarray Type: NONE Start: Rows: Frame Time:
Duty Cycle: N Number: Tprimary: Tsecondary:
Onchip Summing: N Rows: 1 Columns: 1
Event Filter: N Lower: Range:
Window Filter: N Start Row: Start Column:
Height: Width:
Lower Energy: Energy Range: Sample Rate:
Dither: Y
Y Amp: 0.004444 deg Y Freq: 0.254600 deg/sec Y Phase: 0
Z Amp: 0.004444 deg Z Freq: 0.180000 deg/sec Z Phase: 0
Cycle: 24 Obj_Flag: NO
2024:028:22:33:04.850 15931242 ACISPKT WSVIDALLDN
2024:028:22:33:22.850 15931312 ACISPKT WSPOW00F1E
==> WSPOW COMMAND LOADS: Feps 1 2 3 4; I0 I1 I2 I3
2024:028:22:34:25.850 15931558 ACISPKT WT006E7034
ACIS PBLOCK LOADS:
parameterBlockId = 0x006e7034
fepCcdSelect = 10 3 2 1 0 10
fepMode = 3 # FEP_TE_MODE_EV5x5
bepPackingMode = 0 # BEP_TE_MODE_FAINT
recomputeBias = 0
trickleBias = 1
subarrayStartRow = 0
subarrayRowCount = 1023
primaryExposure = 31
secondaryExposure = 0
dutyCycle = 0
lowerEventAmplitude = 20
eventAmplitudeRange = 3250
windowSlotIndex = 65535
2024:028:22:34:29.850 15931574 ACISPKT RS_0000001
2024:028:22:34:33.850 15931589 ACISPKT RH_0000001
2024:028:22:34:56.850 15931679 ACISPKT XTZ0000005
---------------------------------------------------------------------------
Parameter block and set up check for 29217
---------------------------------------------------------------------------
==> Parameter Block for SI mode TE_006E6 is WT006E7034 and is stored.
==> FP instrument, Grating and SIM-Z offsets OK.
==> Parameter Block and OCAT are consistent for this observation
====> CHANDRA STATUS ARRAY=(ACIS-I,HETG-OUT,LETG-OUT,29217,OORMPEN,CSELFMT2,ENAB)
2024:029:00:56:02.277 15964690 ORBPOINT EAPOGEE
2024:029:01:21:43.850 15970731 ACISPKT AA00000000
==> ACIS integration time of 10.01 ks.
This is 100.07% of the requested time.
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@-@
-- CHANDRA LOAD END --
************************
ACIS LOAD REVIEW SUMMARY
************************
THERE ARE 18 REAL-TIME COMM PASSAGES IN THIS LOAD.
FREQUENCY OF ACIS COMMAND OCCURRENCES TABLE:
----------------------------------------------------------------------
OBSIDs WSVIDALLDNs RS_0000001 RH_0000001 X[TC]Z0000005 AA00000000
----------------------------------------------------------------------
59 40 40 37 37 98
**NOTE: There are 3 perigee crossings in this load.
FREQUENCY OF OTG INSERTIONS/RETRACTIONS:
--------------------------------------------
LETG_INs LETG_REs HETG_INs HETG_REs
--------------------------------------------
1 1 3 3
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
AT LEAST ONE INSTANCE OF THE FOLLOWING TYPES OF WARNINGS OR ERRORS WERE ENCOUNTERED:
o. There is a change from FMT2 before an ACIS stop science.
o. There is a SIM translation that occurs DURING an ACIS science run.
o. The OBSID change to 27401 that occurs less than 3 mins after a stop science.
o. The OBSID change to 26787 that occurs less than 3 mins after a stop science.
o. The OBSID change to 29220 that occurs less than 3 mins after a stop science.
o. RadMon was disabled prior to radbelt transit but we were NOT at HRC-S yet.
o. RADMON occured more than 3.25 minutes AFTER stop science.
o. The OBSID change to 29212 that occurs less than 3 mins after a stop science.
o. The OBSID change to 28044 that occurs less than 3 mins after a stop science.
--------------------------------------------------------------------------
ACIS LOAD REVIEW FAILED