|
|
|
|
SynopsisA tool to test the installation of the CIAO Calibration Database (CALDB) Syntaxcheck_ciao_caldb DescriptionThe check_ciao_caldb tool allows users to easily check that the CIAO Calibration Database (CALDB) is installed correctly. It is intended to be used after installing or upgrading CIAO, or to help diagnose problems seen with other CIAO toos. The tool only tests the basic installation, and so provides a quick and easy test. It does not perform the same verification steps as the chkcif tool from the FTOOLS package (as described on the Download the CIAO CALDB page), which should be used for a more thorough evaluation. Tool behaviorAs shown in the example below, the tool will print out some basic information on the CALDB installation, and then exit with a status value of 0 when the installation is correct. If there is a problem then an error message will be displayed and the exit status will be set to a non-zero value. AvailabilityThe check_ciao_caldb tool is part of the CIAO contributed scripts package which should have been included as part of the CIAO installation. Exampleunix% check_ciao_caldb The tool accepts no arguments. If the Chandra CALDB is set up correctly then you should see something like the following:
CALDB environment variable = /soft/ciao-4.1/CALDB
which is a link to = /soft/caldb41/
CALDB version = 4.1.3
relelase date = 2009-07-06T16:00:00
CALDB query completed successfully.
The actual output will vary depending on where, and what version, of the CALDB is installed. NOTESThis tool is not an official part of the CIAO release but is made available as "contributed" software via the CIAO scripts page. Please see the installation instructions page for help on installing the package. |
![]() |
The Chandra X-Ray
Center (CXC) is operated for NASA by the Smithsonian Astrophysical Observatory. 60 Garden Street, Cambridge, MA 02138 USA. Email: cxcweb@head.cfa.harvard.edu Smithsonian Institution, Copyright © 1998-2004. All rights reserved. |