SDP
- Eliminate N day delay before each AP run.
OVERDUE :
FUTURE RELEASES :
Priorities (1-highest (up to 3) , 10-lowest (up to 30))
1) L2 MON (MTA_SOURCE_MON)
Speced separately, - See XPIPE
Priority 5 JGP 1 Month after stable L2 source lists.
2) SI-Background MTA_SIB
- From L2 DATA create a mask of sources
+Remove these regions from the L1 data product.
+create table of /counts/time (~5 min) /energy bin
+create plot of /counts/time (~5 min) /energy bin vs time
Purpose, track the background rate of the SIs and the sky.
Procedure- remove all sources from an event List.
Calculate /counts/time (~5 min) /energy bin
Energy bin and time window are parameters
Output: to web: tables, per OBI
OUTPUT to DB: RA, DEC, TIME, calculated quantities NEW DB.
Status :Abbey's tool almost done, no other code.
Priority MTA 7 RO 2 months.
3) HRC/ACIS_DOSE (MTA_HRC_DOSE)
Purpose Monitor HRC dosage/pore Alert scientists if problem
Procedure-PerOBI make list of events/ pore pair
Each week create dose image/list
Use (coadd/ Dmcopy )last 4 weeks to create last month
Use last 52 weeks to create last year
Use all weeks to create mission
Notes: use chip coords
Note: well developed may have out paced DM tools
Note; if cnt/pore GT Y Alert yellow, GT R RED,
Note Y and R are different for the /OBI and the Weekly and the monthly etc.
Output Web page Hottest pores table
Output DB, dose list/images
Output for all pore GT D, CX,CY, Total dose
Status: spec 80%
Status tool 80%
Status pipeline 40% understood, not implemented
Status DB 0%
Priority MTA 5 JGP 3 weeks
Priority DB 5 -AE 2 weeks
4) ACA_TRD - This is the L1 Aspect monitoring and trending.
Proority MTA 6
5) Monitor - DEA HOUSEKEEPING - spec delivered 3/22/99. Being handled
through Direct DOSS tools.
6)MTA_ACIS_CCD_MON-
- From ACIS L1 Event list create
+ Histograms
o pha
o pi
+ Plots
o pha histogram
o pi histogram
o cnts vs time ( per chip )
purpose: monitor CTI, and general ACIS performance
procedure OPEN ACIS L1 event lists create fixed plots and histograms
procedure Open ACIS BIAS files create fixed plots
output to web pages: the plots /per obi or per bias
output to DB #G64, #G2, #G8 ,#G16, Node_ID, CCD_ID. Obsid.
Output to DB BIAS data: FWHM, meadn, meadian, mode, min, max,
node_id,ccdid, obsid.
THE OTHER SUMMARY INFO IN THE SPEC IS LESS IMPORTANT
AT THIS TIME.
Status: Spec 90%
Status: tool 90%
Status: Pipeline 10%
Status: DB 0% ; Takashi is able to use data though
Status; Integ Good, AP can handle this tool.
Priority MTA 5 JGP 2 weeks
Priority DB 2 AE 2 weeks
7)Configuration tool: MTA_CHANDRA_CONFIG
- From RAW DATA create
+tab delimited files 1 new record when each tracked value
changes
+A plot of the spacecraft configuration vs. time
Purpose -create an easy access mission history
Procedure- Run ACORN TC on all dumps and associated procedures
developed by SJW/TI
Traced quantities (HRC- S HV, HRC-I HV, ACIS CR (2) ,GRAT POS
(4) SIM POS (2), OBSID, FMT
Output- to web pages:- plot of traced quantities
Output to DB: single file with all traced quantities throughout
mission (RDB and fits)
Issue how to we manage the data product, Write the RDB to the
web page and constantly replace/update FITS file.
Status: spec 100%
Status tool 100%
Status Pipeline 25% defined and working as cron tab
Status integ 50% - should be implemented as part of MTA
monitor_RAW? Or as separate version of it RAWII.
Priority MTA 5 it works as is RO/DP 1 month to integrate
Priority DB 4 ditto
Currently handled through Direct DOSS tools.
8)MTA_PRS REVAMP
Prioity MTA 6 RO 1 Month
9) Integrations Tool (IT)
Time comps on DB items
I.e. RPMs * time = rotations.
Status undone I think this is a pure DB app, DB priority 6.
Lower priority
- FLAG - still unstable, these need to be fixed (Priority 7)
- Processing speed. (priority 9)
- Bias_Mon (priority 7)
- Check_ACIS LOAD (priority 7) spec delivered to ISOBE,
Shanil will develop.
- ACIS configuration (priority 7) ibid
- Merged Status files. (priority 7)
- Determine pointing offsets - DOSS direct development underway.
- MTA DI - string handling. - PSUEDO code exists (Priority 7)
- Trend HRMA focus (this covers 10 MTA tasks & gets complicated)
(priority 7) -Scheduled for DOSS development June 2000.
- SIM positional accuracy tool (includes repeatability, settling time
and hysteresis.) This is being handled in by DOSS direct right now (priority 8)