BEP_PCB temperatures check
Summary
| Date start | 2017:314:17:18:18.109 |
| Date stop | 2017:323:15:07:56.581 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2017/NOV1117/ofls |
| Run time | Thu Nov 9 15:57:10 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.11 | -2.33 | -1.60 | -0.32 | 0.71 | 2.18 | 3.05 |
| PITCH | -5.673 | -0.208 | -0.123 | -0.009 | 0.089 | 0.206 | 4.453 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -0.994 | -0.431 | -0.153 | 0.300 | 0.482 | 0.632 | 1.400 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.11 | 2.00 |
| TMP_BEP_PCB | 99 | 3.05 | 2.00 |
| PITCH | 1 | -5.673 | 3.00 |
| PITCH | 99 | 4.453 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
