ACIS L/M/H 18 Shift, August 9/10 1999


We will carry out the On-Orbit background measurement
with the door open on the I- and S-array. (SAP 61045).


...Cooling down FP to -90 C

221:11:16 FP = -90 C & maintaining

221:12:13 Start SAP 61045, ACIS Orbital background measurement
with door open. OBSID =62710

	SR1 - I-array

221:13:55 Telemtry drop; 221:14:44 telemetry back...

221:16:25 FORMAT 4 for OBC-B on-orbit load

221:18:35*****************************************************
	 ******Now we are on OBC-B for the next ~12 hrs so use
	 ******B-side scripts until we're on A-side again!
	 *****************************************************
	 
	 !!!!! OBSID was Re-Set to 0 when OBC's switched !!!!!
	 
221:18:37 Resume FMT 2: FP=-89.7 C

221:18:52 Stop science issued; 18:54 echo on pmon


221:18:57 No B-side scripts for SAP61045...and on B-shift !
	  - this will delay Start of SR2....
	  
221:20:15 CAP to incorporate B-side scripts submitted

...and it's approved!

221:20:45 Start SR2  OBSID=62709	FP=-89.7C

	   S-array

222:01:46 Stop SR2


222:02:04 Start SR3   OBSID=62708	FP=-89.7C

	   I-array
	   
222:04:17 Stop SR3 due to upcoming OBC change (B-->A) since
	  this will screw-up OBSID's...will resume
	  same type (I-array) of run after OBC change.
	  
	  
	  

222:09:12  Back on OBC-A. Format 2; FP temp = -89.7 C

222:09:20 OBSID=62707 

222:09:31 Start SR4  ****I-array again****

	  9:40 DSN handover...may lose some real-time bias data
	  
	  


Yousaf
Royce
Bev
George
Mark