MTA Monitoring Report 01/04/02 - 01/10/02

Archive of Monthly reports

Radiation

SCS107 was manually commanded at 2002:011:03:17 GMT, due to over-budget predicted fluence.
Expect loads to resume at 2002:012:08:00 GMT.

The following alert was issued just before SCS107 ran:
Date: Thu, 10 Jan 2002 22:00:02 -0500 (EST)
ACIS ALERT!! ACE p+!
ACIS fluence = 1.01e+09 p/(cm^2-sr-MeV), in previous 15.9 hrs
Above limit=1.0E+09 at 112 - 187 keV.
Latest ACIS proton flux = 4.34e+04 p/(cm^2-s-sr-MeV).

CTI Trend

Average of ACIS-I CCDs (MnKa) slope 1.240e-8 CTI/day
Detrended slope 1.181e-8 CTI/day

ACIS Warm Pixels

	CCD0	CCD2	CCD3	CCD4	CCD5	CCD6	CCD7	CCD8
New this week/ Reappeared					(514,940)
Previously reported - still observed			(811,637)	(247,364)	(1-3,775-1024) (226,565) (232-245, 313) (509, spurious rows) (510-511,775-1024) (512,775) (513,776-1024) (607,281) (1022,166)	(360,249) (766,501)	(1-3,1-114) (1-3,775-1024) (4,spurious rows) (509, spurious rows) (510-511,775-1024) (512,775) (513-515,775-1024) (516,spurious rows) (1021,1) (1021,198) (1021,408) (1021,684) (1022,775)	(62,482) (587,544)
Previously reported - not observed during this period	(995,200)	(483,816)			(226-246,313) (514,861)

ACIS Focal Plane Temperature

Day (DOY)	Temp (C)	Width (Days)
4.78	-118.74	0.43
10.18	-117.93	0.65

SIM Movements

Telemetry

HRMAAVG (AVG OF HRMA METRICS): red warning. Min: 294.6 (lower red limit: 305)
OBADIAGRAD (OBA DIAM GRAD): yellow warning. Max: 2.10 (upper yellow limit: 1.11)
HKBBIASLEAKI (HK B bias leakage current): yellow warning. Max: 0.64 (upper yellow limit: 0.5)
TEPHIN (EPHIN SENSOR HOUSING TEMP): yellow warning. Max: 302.09 (upper yellow limit: 300.2)
5TEPHIN (EPHIN TEMP): yellow warning. Max: 301.53 (upper yellow limit: 300.0)
OOBTHR56 (RT 158: TFTE AFT CYLINDER): yellow warning. Max: 288.92 (upper yellow limit: 288.6)
LETG Retraction

HRMAAVG (AVG OF HRMA METRICS): red warning. Min: 294.6 (lower red limit: 305)
OBADIAGRAD (OBA DIAM GRAD): yellow warning. Max: 2.34 (upper yellow limit: 1.11)
HKBBIASLEAKI (HK B bias leakage current): yellow warning. Max: 0.62 (upper yellow limit: 0.5)
TEPHIN (EPHIN SENSOR HOUSING TEMP): yellow warning. Max: 301.58 (upper yellow limit: 300.2)
5TEPHIN (EPHIN TEMP): yellow warning. Max: 301.10 (upper yellow limit: 300.0)
TFSSBKT1 (FSS BRACKET-1 TEMP (+Y)): yellow warning. Max: 333.98 (upper yellow limit: 333.0)
TFSSBKT2 (FSS BRACKET-2 TEMP (-Y)): yellow warning. Max: 333.98 (upper yellow limit: 333.0)
TB1T3 (BATT 1 TEMP 3): yellow warning. Min: 270.09 (lower yellow limit: 270.2)
TMZP_CNT (-Z PNL TEMP:CENTER): yellow warning. Max: 327.66 (upper yellow limit: 327.4)
OOBTHR56 (RT 158: TFTE AFT CYLINDER): yellow warning. Max: 288.74 (upper yellow limit: 288.6)

HRMAAVG (AVG OF HRMA METRICS): red warning. Min: 294.6 (lower red limit: 305)
OBADIAGRAD (OBA DIAM GRAD): yellow warning. Max: 2.60 (upper yellow limit: 1.11)
HKBBIASLEAKI (HK B bias leakage current): yellow warning. Max: 0.61 (upper yellow limit: 0.5)
TEPHIN (EPHIN SENSOR HOUSING TEMP): yellow warning. Max: 301.58 (upper yellow limit: 300.2)
5TEPHIN (EPHIN TEMP): yellow warning. Max: 301.10 (upper yellow limit: 300.0)
TFSSBKT1 (FSS BRACKET-1 TEMP (+Y)): yellow warning. Max: 335.56 (upper yellow limit: 333.0)
TFSSBKT2 (FSS BRACKET-2 TEMP (-Y)): yellow warning. Max: 333.98 (upper yellow limit: 333.0)
TB1T3 (BATT 1 TEMP 3): yellow warning. Min: 270.09 (lower yellow limit: 270.2)
TMZP_CNT (-Z PNL TEMP:CENTER): yellow warning. Max: 327.66 (upper yellow limit: 327.4)
TSCIUSF1 (SC-IUS FITTING-1 TEMP): red warning. Min: 351.27 (upper red limit: 349.7)
TSCIUSF8 (SC-IUS FITTING-8 TEMP): yellow warning. Min: 349.70 (upper yellow limit: 346.9)
OOBTHR56 (RT 158: TFTE AFT CYLINDER): yellow warning. Max: 288.74 (upper yellow limit: 288.6)

HRMAAVG (AVG OF HRMA METRICS): red warning. Min: 294.6 (lower red limit: 305)
OBADIAGRAD (OBA DIAM GRAD): yellow warning. Max: 2.54 (upper yellow limit: 1.11)
HKBBIASLEAKI (HK B bias leakage current): yellow warning. Max: 0.66 (upper yellow limit: 0.5)
TEPHIN (EPHIN SENSOR HOUSING TEMP): yellow warning. Max: 302.09 (upper yellow limit: 300.2)
5TEPHIN (EPHIN TEMP): yellow warning. Max: 301.95 (upper yellow limit: 300.0)
FAMTRTEMP (FA Motor Temperature): yellow warning. Max: 283.65 (upper yellow limit: 282.0)
TFSSBKT1 (FSS BRACKET-1 TEMP (+Y)): yellow warning. Max: 337.13 (upper yellow limit: 333.0)
TFSSBKT2 (FSS BRACKET-2 TEMP (-Y)): yellow warning. Max: 335.56 (upper yellow limit: 333.0)
TB1T3 (BATT 1 TEMP 3): yellow warning. Min: 270.09 (lower yellow limit: 270.2)
TMZP_CNT (-Z PNL TEMP:CENTER): yellow warning. Max: 328.72 (upper yellow limit: 327.4)
TSCIUSF1 (SC-IUS FITTING-1 TEMP): yellow warning. Min: 349.70 (upper yellow limit: 346.9)
TSCIUSF8 (SC-IUS FITTING-8 TEMP): yellow warning. Min: 349.70 (upper yellow limit: 346.9)
TCYLAFT1 (CNT CYL TEMP:16-IN FWD OF SC-TS FIT-1): yellow warning. Max: 294.55 (upper yellow limit: 294.1)
OOBTHR56 (RT 158: TFTE AFT CYLINDER): yellow warning. Max: 288.74 (upper yellow limit: 288.6)

HRMAAVG (AVG OF HRMA METRICS): red warning. Min: 294.6 (lower red limit: 305)
OBADIAGRAD (OBA DIAM GRAD): yellow warning. Max: 1.73 (upper yellow limit: 1.11)
HKBBIASLEAKI (HK B bias leakage current): yellow warning. Max: 0.68 (upper yellow limit: 0.5)
TEPHIN (EPHIN SENSOR HOUSING TEMP): yellow warning. Max: 302.69 (upper yellow limit: 300.2)
5TEPHIN (EPHIN TEMP): yellow warning. Max: 302.38 (upper yellow limit: 300.0)
TMZP_CNT (-Z PNL TEMP:CENTER): yellow warning. Max: 327.66 (upper yellow limit: 327.4)
TB1T3 (BATT 1 TEMP 3): yellow warning. Min: 270.09 (lower yellow limit: 270.2)
TCYLAFT1 (CNT CYL TEMP:16-IN FWD OF SC-TS FIT-1): yellow warning. Max: 294.55 (upper yellow limit: 294.1)
OOBTHR56 (RT 158: TFTE AFT CYLINDER): yellow warning. Max: 288.92 (upper yellow limit: 288.6)

HRMAAVG (AVG OF HRMA METRICS): red warning. Min: 294.6 (lower red limit: 305)
OBADIAGRAD (OBA DIAM GRAD): yellow warning. Max: 1.37 (upper yellow limit: 1.11)
No EPHIN limit trips.
Spacecraft Temps good.

HRMAAVG (AVG OF HRMA METRICS): red warning. Min: 294.6 (lower red limit: 305)
OBADIAGRAD (OBA DIAM GRAD): yellow warning. Max: 2.22 (upper yellow limit: 1.11)

Gyro Bias Drift

Recent Observations

Trending

Most msids are keeping the same trends from the previous reporting period ( 10/19/01 - 10/25/01 weekly)
Interesting trends are indicated with "*".

• Grating Voltages and Rotation Angles A
• Grating Voltages and Rotation Angles B

  MSID	DESCRIPTION	COMMENT
  4MP5AV	MCE A: +5 VOLT MONITOR VDC	scattered between 0.5 and 2.5, max 5.02
  4MP28AV	MCE A: +28 VOLT MONITOR	scattered between 0.4 and 2.3, max around 7
  4HPOSARO	HETG ROTATION ANGLE POSITION MONITOR A	min around 7, max around 79.8
  4LPOSARO	LETG ROTATION ANGLE POSITION MONITOR A	min around 7, max around 79.1
  4MP5BV	MCE B: +5 VOLT MONITOR VDC	scattered between 1.0 and 2.5, max @ 5
  4MP28BV	MCE B: +28 VOLT MONITOR	scattered between 4 and 12, max @28
  4HPOSBRO	HETG ROTATION ANGLE POSITION MONITOR B	min around 7, max around 80.6, drops to 80.2 lately
  4LPOSBRO	LETG ROTATION ANGLE POSITION MONITOR B	min around 5, max around 78.4, drops to 78.0 lately

  
  
• Grating Motions

  MSID	DESCRIPTION	COMMENT
  N_MOVES_HETG_INSR	Total number of moves when inserting HETG	constant @1
  N_MOVES_HETG_RETR	Total number of moves when retracting HETG	constant @1
  N_MOVES_LETG_INSR	Total number of moves when retracting LETG	range 14 to 18
  N_MOVES_LETG_RETR	Total number of moves when inserting LETG	6 to 8 since DOM 700
  N_LONG_HETG_INSR	Number of long moves when inserting HETG	constant @1
  N_LONG_HETG_RETR	Number of long moves when retracting HETG	constant @1
  N_LONG_LETG_INSR	Number of long moves when inserting LETG	constant @1
  N_LONG_LETG_RETR	Number of long moves when retracting LETG	constant @1
  T_LONG_HETG_INSR	Duration of long move when inserting HETG	154.8 s since ~DOM 750
  T_LONG_HETG_RETR	Duration of long move when retracting HETG	154.8 s since ~DOM 750
  T_LONG_LETG_INSR	Duration of long move when inserting LETG	152.2 s since ~DOM 750
  T_LONG_LETG_RETR	Duration of long move when retracting LETG	153.2 s since ~DOM 750
  N_SHORT_HETG_INSR	Number of short moves when inserting HETG	n/a, always 0
  N_SHORT_HETG_RETR	Number of short moves when retracting HETG	n/a, always 0
  N_SHORT_LETG_INSR	Number of short moves when inserting LETG	range 13 to 17
  N_SHORT_LETG_RETR	Number of short moves when retracting LETG	5-6, sinve DOM ~730
  EMF_MIN_LONG_HETG_INSR	Long move min EMF when inserting HETG	5.1 to 5.5
  EMF_MIN_LONG_HETG_RETR	Long move min EMF when retracting HETG	4.95 to 5.5
  EMF_MIN_LONG_LETG_INSR	Long move min EMF when inserting LETG	5.8 to 6.1
  EMF_MIN_LONG_LETG_RETR	Long move min EMF when retracting LETG	5.9
  EMF_AVG_LONG_HETG_INSR	Long move avg EMF when inserting HETG	5.75 to 5.9
  EMF_AVG_LONG_HETG_RETR	Long move avg EMF when retracting HETG	5.75 to 5.9
  EMF_AVG_LONG_LETG_INSR	Long move avg EMF when inserting LETG	6.37
  EMF_AVG_LONG_LETG_RETR	Long move avg EMF when retracting LETG	6.35
  EMF_MAX_LONG_HETG_INSR	Long move max EMF when inserting HETG	6.2 to 6.5
  EMF_MAX_LONG_HETG_RETR	Long move max EMF when retracting HETG	6.2 to 7.2
  EMF_MAX_LONG_LETG_INSR	Long move max EMF when inserting LETG	7.0
  EMF_MAX_LONG_LETG_RETR	Long move max EMF when retracting LETG	7.0
  EMF_MIN_SHORT_HETG_INSR	Short move min EMF when inserting HETG	n/a
  EMF_MIN_SHORT_HETG_RETR	Short move min EMF when retracting HETG	n/a
  EMF_MIN_SHORT_LETG_INSR	Short move min EMF when inserting LETG	4.0 to 5.5
  EMF_MIN_SHORT_LETG_RETR	Short move min EMF when retracting LETG	4.0 to 5.5
  EMF_AVG_SHORT_HETG_INSR	Short move avg EMF when inserting HETG	n/a
  EMF_AVG_SHORT_HETG_RETR	Short move avg EMF when retracting HETG	n/a
  EMF_AVG_SHORT_LETG_INSR	Short move avg EMF when inserting LETG	4.3 to 5.8
  EMF_AVG_SHORT_LETG_RETR	Short move avg EMF when retracting LETG	5.0 to 5.7
  EMF_MAX_SHORT_HETG_INSR	Short move max EMF when inserting HETG	n/a
  EMF_MAX_SHORT_HETG_RETR	Short move max EMF when retracting HETG	n/a
  EMF_MAX_SHORT_LETG_INSR	Short move max EMF when inserting LETG	5.6 to 6.5
  EMF_MAX_SHORT_LETG_RETR	Short move max EMF when retracting LETG	5.8 to 6.3
  OBC_ERRS_HETG_INSR	Number of OBC errors when inserting HETG	0
  OBC_ERRS_HETG_RETR	Number of OBC errors when retracting HETG	0
  OBC_ERRS_LETG_INSR	Number of OBC errors when inserting LETG	0 to 14, 0 since ~DOM 730
  OBC_ERRS_LETG_RETR	Number of OBC errors when retracting LETG	0 to 6, 0 since ~DOM 730