Cron Error Log for MTA on R2D2: Jun 2013

-----------------
Sat Jun 1 2013
-----------------
/home/mta/Logs//trending.perl.cron

Failed to open virtual file /data/mta/www/mp_reports/20130531/compephinkeyrates/data/compephinkeyrates_summ.fits[cols name,average,error]

# dmtcalc (8.5.2): ERROR: the following errors occurred during initialization of the expressions.

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col2' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL2 was not found in file zdata.fits.

mv: cannot stat `temp.fits': No such file or directory

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col3' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL3 was not found in file zdata.fits.

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col4' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL4 was not found in file zdata.fits.

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col5' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL5 was not found in file zdata.fits.

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col6' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL6 was not found in file zdata.fits.

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col7' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL7 was not found in file zdata.fits.

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col8' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL8 was not found in file zdata.fits.

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col9' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL9 was not found in file zdata.fits.

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col10' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL10 was not found in file zdata.fits.

# dmtcalc (8.5.2): dsFINDCOLUMNERR -- ERROR: Column 'col11' was not found in file 'zdata.fits'.

# dmtcalc (8.5.2): ERROR: the column COL11 was not found in file zdata.fits.

Failed to open virtual file zdata.fits[cols TIME,SCE1300L1_AVG,SCE1300L1_DEV,SCE150L1_AVG,SCE150L1_DEV,SCE3000L1_AVG,SCE3000L1_DEV,SCE300L1_AVG,SCE300L1_DEV,SCINTL1_AVG,SCINTL1_DEV]

# dmmerge (8.5.2): ERROR: Couldn't open file #2 ( zdata_clean.fits )

mv: cannot stat `out.fits': No such file or directory

Failed to open virtual file /data/mta/www/mp_reports/20130531/compsimoffset/data/compsimoffset_summ.fits[cols name,average,error]

Failed to open virtual file zdata.fits[cols TIME,FLEXADIF_AVG,FLEXADIF_DEV,FLEXBDIF_AVG,FLEXBDIF_DEV,FLEXCDIF_AVG,FLEXCDIF_DEV]

/home/mta/Logs//focal_linux.cron

ppmtogif: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

pnmremap failed, rc=13

#############################################################################

-----------------
Sun Jun 2 2013
-----------------
/home/mta/Logs//cron_check_r2d2_mta

mv: cannot stat `/data/mta/Script/Cron_check/Error_logs/error_list_r2d2_mta': No such file or directory

/home/mta/Logs//trending.perl.cron

Failed to open virtual file /data/mta/www/mp_reports/20130601/compephinkeyrates/data/compephinkeyrates_summ.fits[cols name,average,error]

#############################################################################

-----------------
Mon Jun 3 2013
-----------------
/home/mta/Logs//max_exp_acis.cron

/proj/sot/ska/arch/x86_64-linux_CentOS-5/lib/python2.7/site-packages/matplotlib/backends/backend_gtk.py:58: GtkWarning: gdk_cursor_new_for_display: assertion `GDK_IS_DISPLAY (display)' failed

RuntimeError: could not create GdkCursor object

/home/mta/Logs//hrc_gain_linux.cron

BEGIN failed--compilation aborted at /data/mta/Script/HRC/Gain/HRC_gain/hrc_gain_fit_gaus_on_hrc.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/HRC/Gain/HRC_gain/hrc_gain_plot_hrc_evol.perl line 2.

/home/mta/Logs//max_exp_hrc.cron

/proj/sot/ska/arch/x86_64-linux_CentOS-5/lib/python2.7/site-packages/matplotlib/backends/backend_gtk.py:58: GtkWarning: gdk_cursor_new_for_display: assertion `GDK_IS_DISPLAY (display)' failed

RuntimeError: could not create GdkCursor object

#############################################################################

-----------------
Tue Jun 4 2013
-----------------
/home/mta/Logs//acis_sci_run_linux

/proj/sot/ska/arch/x86_64-linux_CentOS-5/bin/perl: symbol lookup error: /soft/lheasoft/headas/x86_64-pc-linux/lib/perl/auto/PGPLOT/PGPLOT.so: undefined symbol: Perl_Gthr_key_ptr

mv: cannot stat `pgplot.ps': No such file or directory

GPL Ghostscript 8.56: Unrecoverable error, exit code 1

ppmtogif: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

/home/mta/Logs//acis_bad_pix_linux.cron

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Bad_pixels/Acis_bad_pix/acis_bad_pix_find_bad_pix.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Bad_pixels/Acis_bad_pix//plot_ccd_history.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Bad_pixels/Acis_bad_pix//plot_front_ccd_history.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Bad_pixels/Acis_bad_pix//plot_col_history.perl line 3.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Bad_pixels/Acis_bad_pix//plot_front_col_history.perl line 2.

mv: cannot stat `*gif': No such file or directory

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Bad_pixels/Acis_bad_pix/acis_bias_plot_bias.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Bad_pixels/Acis_bad_pix/acis_bias_plot_sub_info.perl line 2.

/home/mta/Logs//acis_dose_linux.cron

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Count_rate/Acis_Count_Rate/acis_count_radiation_data.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Count_rate/Acis_Count_Rate/acis_count_plot.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Count_rate/Acis_Count_Rate/acis_count_ephin_plot.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Count_rate/Acis_Count_Rate/acis_count_month_avg.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Count_rate/Acis_Count_Rate/acis_count_long_term_plot.perl line 2.

gs: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by gs)

pamflip: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

ppmtogif: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

pamtogif: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

/usr/bin//gs: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by /home/ascds/DS.release/ots/lib/libgs.so.8)

/home/mta/Logs//focal_linux.cron

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Focal/Acis_ft/acis_ft_plot_day.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Focal/Acis_ft/acis_ft_plot_week.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Focal/Acis_ft/acis_ft_plot_3day.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Focal/Acis_ft/acis_ft_plot_month.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Focal/Acis_ft/acis_ft_plot_3_month.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Focal/Acis_ft/acis_ft_plot_long_term.perl line 2.

BEGIN failed--compilation aborted at /data/mta/Script/ACIS/Focal/Acis_ft/acis_ft_diff_fp_plots.perl line 2.

#############################################################################

-----------------
Wed Jun 5 2013
-----------------
/home/mta/Logs//acis_dose_linux.cron

dmlist: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory

/home/mta/Logs//acis_sci_run_linux

gs: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by gs)

pamflip: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

pamtogif: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

/usr/bin//gs: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by /home/ascds/DS.release/ots/lib/libgs.so.8)

/home/mta/Logs//sim_test2.cron

gzip: /lib64/libc.so.6: version `GLIBC_2.6' not found (required by gzip)

acorn: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by acorn)

acorn: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by /home/ascds/DS.release/ots/lib/libfontconfig.so.1)

/home/mta/Logs//disk_space2.cron

/usr/bin//gs: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by /home/ascds/DS.release/ots/lib/libgs.so.8)

pamflip: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

ppmtogif: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

pnmcrop: Error reading magic number from Netpbm image stream. Most often, this means your input file is empty.

/home/mta/Logs//trending.perl.cron

dmlist: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory

dmcopy: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory

dmtcalc: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory

dmmerge: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory

/home/mta/Logs//mj_test2.cron