Chandra X-Ray Observatory
	(CXC)
Skip to the navigation links
Last modified: December 2015

URL: http://cxc.harvard.edu/sherpa/ahelp/xsapec.html
AHELP for CIAO 4.9 Sherpa v1

xsapec

Context: models

Synopsis

APEC thermal plasma model. XSPEC model.

Description

An emission spectrum from collisionally-ionized diffuse gas calculated using the ATOMDB code v2.0.2. More information can be found at http://atomdb.org/ which should be consulted by anyone running this model.

See also the xsvapec and xsvvapec models.

This is an additive model component.

xsapec Parameters

Number Name Description
1 kT plasma temperature (keV)
2 Abundanc Metal abundances (He fixed at cosmic). The elements included are C, N, O, Ne, Mg, Al, Si, S, Ar, Ca, Fe, Ni. Relative abundances are set by the set_xsabund command. The trace element abundances are from the set_xsxset APEC_TRACE_ABUND value, the default is 1.0.
3 redshift redshift, z
4 norm 10^-14 / (4 pi (D_A*(1+z))^2) Int n_e n_H dV, where D_A is the angular diameter distance to the source (cm), n_e is the electron density (cm^-3), and n_H is the Hydrogen density (cm^-3)

XSPEC version

This information is taken from the XSPEC User's Guide. Version 12.9.0o of the XSPEC models is supplied with CIAO 4.9.

Changing the AtomDB version

By default this model reads atomic physics continuum and line data from the files apec_v[version]_coco.fits and apec_v[version]_line.fits in the $ASCDS_INSTALL/ots/spectral/modelData directory. Different files can be specified by using the set_xsxset command to change the "APECROOT" value. There are three options.

  • APECROOT can be set to a version number (eg 1.10, 1.2.0, 1.3.1, 2.0.1). In this case the value of APECROOT will be used to replace 2.0.2 in the name of the standard files and the resulting files will be assumed to be in the modelData directory.
  • Alternatively, a filename root (eg apec_v1.2.0) can be given. This root will be used as a prefix for the _coco.fits and _line.fits files.
  • Finally, if neither of these work then the model will assume that the APECROOT value gives the complete directory path

So

sherpa> set_xsxset('APECROOT', '/foo/bar/apec_v1.2.0')

will use the input files /foo/bar/apec_v1.2.0_coco.fits and /foo/bar/apec_v1.2.0_line.fits.

Thermal broadening

Thermal broadening of lines can be included by using

sherpa> set_xsxset('APECTHERMAL', 'yes')

This runs significantly slower than the option without thermal broadening so you should only use this when necessary. Velocity broadening of lines can be included by using

sherpa> set_xsxset('APECVELOCITY', '230')

where the velocity value (here set to 230) is sigma in km/s (and is given as a string). This is added in Gaussian quadrature with any thermal broadening in use.

Changing the abundances

The xsapec and xsbapec models use abundances set by the set_xsabund() command. The xsvapec, xsbvapec, xsvvapec, and xsbvvapec variants allow the user to set the abundance using additional parameters. For xsapec, xsbapec, xsvapec, and xsbvapec the abundances of the trace elements (ie Li, Be, B, F, Na, P, Cl, K, Sc, Ti, V, Cr, Mn, Co, Cu, Zn) can be set using the APEC_TRACE_ABUND setting. These trace element abundances can be set either to the abundance of one of the main elements or to a numerical value (relative to Solar). For instance,

sherpa> set_xsxset('APEC_TRACE_ABUND', 'Fe')

sets trace element abundances to that of iron while

sherpa> set_xsxset('APEC_TRACE_ABUND', '1.0')

sets them to Solar. The default value for APEC_TRACE_ABUND is 1.0. Note that this means that the xsapec, xsbapec, xsvapec and xsbvapec models will show emission lines even if the abundance parameters are set to zero.

Line emission

Line emission for APEC-related models can be controlled with the APECNOLINES xset setting. The default is to include lines, but using a setting of 'on' will avoid calculating lines. That is

sherpa> set_xsxset('APECNOLINES', 'on')

will exclude lines from any APEC model. To get the lines back, use

sherpa> set_xsxset('APECNOLINES', 'off')

An example of changing this setting is shown below:

sherpa> egrid = np.arange(0.1, 10, 0.01)
sherpa> create_model_component('xsapec', 'mdl')
sherpa> set_xsxset('APECNOLINES', 'on')
sherpa> ynolines = mdl(egrid)
sherpa> set_xsxset('APECNOLINES', 'off')
sherpa> ylines = mdl(egrid)
sherpa> clear()
sherpa> add_histogram(egrid, ynolines)
sherpa> add_histogram(egrid, ylines, ['*.color', 'red'])
sherpa> log_scale()

Bugs

For a list of known bugs and issues with the XSPEC models, please visit the XSPEC bugs page.

To check the X-Spec version used by Sherpa, use the get_xsversion routine from the xspec module:

sherpa> from sherpa.astro.xspec import get_xsversion
sherpa> get_xsversion()
'12.9.0o'

See Also

models
absorptionedge, absorptiongaussian, absorptionlorentz, absorptionvoigt, accretiondisk, atten, bbody, bbodyfreq, beta1d, beta2d, blackbody, box1d, box2d, bpl1d, bremsstrahlung, brokenpowerlaw, ccm, const1d, const2d, cos, delta1d, delta2d, dered, devaucouleurs2d, disk2d, edge, emissiongaussian, emissionlorentz, emissionvoigt, erf, erfc, exp, exp10, fm, gauss1d, gauss2d, hubblereynolds, jdpileup, linebroad, list_model_components, list_models, lmc, load_xscflux, load_xsgsmooth, load_xsireflect, load_xskdblur, load_xskdblur2, load_xskerrconv, load_xslsmooth, load_xspartcov, load_xsrdblur, load_xsreflect, load_xssimpl, load_xszashift, load_xszmshift, log, log10, logabsorption, logemission, logparabola, lorentz1d, lorentz2d, models, normbeta1d, normgauss1d, normgauss2d, opticalgaussian, poisson, polynom1d, polynom2d, polynomial, powerlaw, powlaw1d, recombination, scale1d, scale2d, schechter, seaton, sersic2d, shell2d, sigmagauss2d, sin, sm, smc, sqrt, stephi1d, steplo1d, tablemodel, tan, xgal, xs, xsabsori, xsacisabs, xsagauss, xsbapec, xsbbody, xsbbodyrad, xsbexrav, xsbexriv, xsbkn2pow, xsbknpower, xsbmc, xsbremss, xsbvapec, xsbvvapec, xsc6mekl, xsc6pmekl, xsc6pvmkl, xsc6vmekl, xscabs, xscemekl, xscevmkl, xscflow, xscompbb, xscompls, xscompmag, xscompps, xscompst, xscomptb, xscompth, xscomptt, xsconstant, xsconvolve, xscplinear, xscutoffpl, xscyclabs, xsdisk, xsdiskbb, xsdiskir, xsdiskline, xsdiskm, xsdisko, xsdiskpbb, xsdiskpn, xsdust, xsedge, xseplogpar, xseqpair, xseqtherm, xsequil, xsexpabs, xsexpdec, xsexpfac, xsezdiskbb, xsgabs, xsgadem, xsgaussian, xsgnei, xsgrad, xsgrbm, xsheilin, xshighecut, xshrefl, xskerrbb, xskerrd, xskerrdisk, xslaor, xslaor2, xslogpar, xslorentz, xslyman, xsmeka, xsmekal, xsmkcflow, xsnei, xsnotch, xsnpshock, xsnsa, xsnsagrav, xsnsatmos, xsnsmax, xsnsmaxg, xsnsx, xsnteea, xsnthcomp, xsoptxagn, xsoptxagnf, xspcfabs, xspegpwrlw, xspexmon, xspexrav, xspexriv, xsphabs, xsplabs, xsplcabs, xsposm, xspowerlaw, xspshock, xspwab, xsraymond, xsredden, xsredge, xsrefsch, xsrnei, xssedov, xssirf, xssmedge, xsspexpcut, xsspline, xssrcut, xssresc, xssss_ice, xsstep, xsswind1, xstbabs, xstbgrain, xstbvarabs, xsuvred, xsvapec, xsvarabs, xsvbremss, xsvequil, xsvgadem, xsvgnei, xsvmcflow, xsvmeka, xsvmekal, xsvnei, xsvnpshock, xsvphabs, xsvpshock, xsvraymond, xsvrnei, xsvsedov, xsvvapec, xsvvgnei, xsvvnei, xsvvnpshock, xsvvpshock, xsvvrnei, xsvvsedov, xswabs, xswndabs, xsxion, xszagauss, xszbabs, xszbbody, xszbremss, xszdust, xszedge, xszgauss, xszhighect, xszigm, xszpcfabs, xszphabs, xszpowerlw, xszredden, xszsmdust, xsztbabs, xszvarabs, xszvfeabs, xszvphabs, xszwabs, xszwndabs, xszxipcf

Last modified: December 2015
Smithsonian Institute Smithsonian Institute

The Chandra X-Ray Center (CXC) is operated for NASA by the Smithsonian Astrophysical Observatory. 60 Garden Street, Cambridge, MA 02138 USA.   Email:   cxchelp@head.cfa.harvard.edu Smithsonian Institution, Copyright © 1998-2017. All rights reserved.